Zyvpee AB03005HX040100 30mm case fan
30 mm hydro-bearing blower fan runs on 5 V at 0.15 A with a two-wire connector
- Fan size30 mm
- Bearing designHydro Bearing
- Power input connector2 wires
- LED lightingNon-LED
- Product typeCPU Cooler Fan
- Compatible withCPU Cooler
- Compact 30 mm turbo blower fits tight CPU coolers
- Hydro bearing reduces friction for quieter long-term operation
- 5 V 0.15 A draw keeps power demand minimal
- Two-wire 2-pin connector simplifies motherboard hookup
- Non-LED 2-tone design avoids light bleed in dark cases
Adda 30 mm turbo blower fan
The Zyvpee AB03005HX040100 is a 30 mm DC blower designed for CPU-cooler mounting. It runs on a 5 V, 0.15 A supply through a two-wire, two-pin connector and uses a hydrodynamic bearing. The 30*4 mm frame and non-LED, two-tone finish suit compact cooling builds.
Builders fitting tight CPU coolers
This fan suits integrators replacing a 30 mm blower on an existing heatsink where the original unit matches the 5 V, two-pin interface. It is not for cases needing larger frame sizes, PWM control, addressable lighting or higher static-pressure ratings than the supplied blower design delivers.
30*4 mm frame with two-pin 5 V power
The critical specification is the 30*4 mm mounting footprint combined with a two-wire, 5 V, 0.15 A power connector. Verify that the target heatsink accepts those exact dimensions and voltage before purchase.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $20.99
- Typical for this category: the median of 8,339 items is $19.99.
- Fan size 30 mm
- Lower than about 97% of the 1,114 comparable items (median 120 mm).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product line | AB03005HX040100 |
| Model name | AB03005HX040100 |
| Product type | CPU Cooler Fan |
| Product color | 2-Tone |
| Power | |
| Power input connector | 2 wires |
| Size & build | |
| Fan size | 30 mm |
| Bearing design | Hydro Bearing |
| Product dimensions | 30 × 04 mm |
| Compatibility | |
| Compatible with | CPU Cooler |
| More details | |
| LED lighting | Non-LED |
Questions about this item
What size mounting holes does the 30mm blower need?
The fan frame is 30 by 4 millimetres, so it fits a standard 30mm square mounting pattern with four screw holes.
How do I connect the two-wire lead without reversing polarity?
Match the red wire to the 5V pin and the black wire to ground on a 5V DC header; the blower will only spin in the correct direction when polarity is observed.
When should the hydro bearing be checked or the fan replaced?
Hydro bearings are sealed for life, so no lubrication is required; replace the blower only if airflow drops noticeably or noise increases after extended use.
More in PC Cooling Fans
Similar items
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
DELTA ELECTRONICS AFB1212GHE-CF00 120mm 38mm 5200 RPM 240.96 CFM 62 dBA case fan
- 1 Fan
- 38 mm
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Cooler Master MFW-B2DN-17NPA-R1 MF120 Lite ARGB 120mm case fan
- 1 Fan
- Case Fan





