We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 100mm blower fan, 97 by 33mm, 3-wire, ball bearing

Zyvpee

Zyvpee BA10033B12U 100mm blower 12V 2.4A 3-wire ball bearing

SKU CH-XGM7-87ZCD

A 100 mm blower fan with dual ball bearings, 12 V 2.4 A draw and a three-wire connector for PWM control

  • Fan size100 mm
  • Bearing design2 Ball
  • Power input connector3 Wires
  • LED lightingNon-LED
  • Product typeBlower
  • Product colorBlack
  • 100 mm blower design moves air through tight spaces
  • 12 V 2.4 A power draw suits standard DC supplies
  • Dual ball bearing reduces friction for longer life
  • 3-wire connector enables speed monitoring and control
  • Compact 97 × 33 mm frame fits small enclosures

Compact 100mm blower for tight enclosures

The Zyvpee BA10033B12U is a 100mm blower-style fan built for confined spaces such as small form factor cases or specialised equipment housings. Its radial airflow pattern pushes air directly through restricted channels where axial fans would struggle. The 3-wire connector provides tachometer feedback for speed monitoring. It suits builders who need directed cooling in a 97mm by 33mm footprint.

Ball-bearing thermals at 12V 2.4A

Dual ball bearings support continuous 12V operation at 2.4A while keeping acoustic output predictable over long duty cycles. The blower wheel concentrates static pressure so heat moves through dense fin stacks or narrow ducts without recirculation. Power draw stays proportional to the 12V rail with no additional control circuitry required. Non-LED black housing avoids light bleed in dark chassis.

Drops into 97mm square cut-outs

The 97mm by 33mm frame aligns with standard 100mm mounting holes, letting the unit bolt straight into prepared panels or replacement slots. Three-wire PWM headers on most motherboards or fan controllers accept the connector directly. No supplementary power adapters or ducting kits are included. Builders needing PWM speed curves or addressable lighting should look elsewhere.

How it compares

Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.

Price $21.99
Pricier than about 55% of the 8,339 comparable items (median $19.99).
Fan size 100 mm
Lower than about 67% of the 1,114 comparable items (median 120 mm).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product lineBA10033B12U
Model nameBA10033B12U
Product typeBlower
Product colorBlack
Power
Power input connector3 Wires
Size & build
Fan size100 mm
Bearing design2 Ball
Product dimensions97 × 33 mm
More details
LED lightingNon-LED

Questions about this item

How do I connect the 3-wire 12V 2.4A power lead to a standard motherboard header?

Align the three-pin connector with the 12 V header key and press straight down; the third wire carries the tachometer signal so the board can report blower speed.

When should I replace the 2-ball-bearing blower?

Replace it once the bearing noise becomes audible or the RPM reported by the third wire drops noticeably below the original level.

Will the 97 mm × 33 mm frame fit my 100 mm mounting holes?

The 97 mm square frame with 33 mm depth matches standard 100 mm blower cut-outs; verify hole spacing against the unit before securing.

More in PC Cooling Fans

Similar items