Zyvpee BM6025-04W-B59 TAM 60x25mm 3-pin blower case fan

Compact blower for tight builds

This Zyvpee BM6025-04W-B59 TAM is a 60 by 25 millimetre blower-style case fan designed for small-form-factor chassis or heatsinks that need directed airflow. It runs on a 12 volt DC supply drawing 0.32 amperes and connects via a standard three-pin power header. The ball-bearing motor and non-LED black frame suit industrial or embedded projects where space is at a premium.

Sustained airflow in confined spaces

The blower wheel pushes air through a narrow exhaust rather than scattering it, so static pressure remains steady when the fan feeds a dense fin stack or a restricted duct. Ball bearings maintain consistent speed during continuous operation without the wear patterns seen in sleeve designs. Because the unit draws only 0.32 amperes at 12 volts, thermal load on the motherboard header stays low even during extended duty cycles.

Verify header and clearance before fitting

Confirm your board or controller provides a three-pin 12 volt header; the fan has no PWM wire so speed control is voltage-based only. Measure the mounting area to ensure a 60 by 25 millimetre footprint and enough depth for the blower housing. Check that the exhaust direction matches your duct or heatsink inlet, as the housing cannot be reoriented after installation.