Zyvpee DFS251012H 25mm 12V 1.5W case fan
25 mm square frame holds a 12 V 1.5 W ball-bearing fan with two-pin power for compact cooling
- Fan size25 mm
- Bearing designBall
- Power input connector2 Pin
- LED lightingNon-LED
- Product colorBlack
- Product dimensions25 × 10 mm
- Compact 25 mm square frame fits tight spaces
- 12 V 1.5 W draw keeps power use low
- Ball bearing design extends operating life
- Two-pin connector simplifies installation
- Non-LED black finish stays discreet inside builds
25 mm 12 V compact case fan
The Zyvpee DFS251012H is a 25 mm square frame fan that is 10 mm thick and runs on 12 V DC power. It draws 1.5 W through a two-pin connector and uses a ball bearing for rotation. The non-LED black housing suits small enclosures such as routers or tight PC builds.
Replaces slim 25 mm two-pin fans
This unit fits the same 2510 footprint as other 25 mm fans with a two-wire 12 V connection. The jump is worth it when the original fan has failed, become noisy or uses a sleeve bearing that has worn out. Ball bearing operation gives longer service life in continuous-use devices.
Check mounting holes and voltage before ordering
Verify that your device accepts a 25 mm square frame with 10 mm depth and a two-pin 12 V header. Confirm the screw pattern matches the 2510 layout shown in the photos. The fan has no speed-control wire so it will run at full speed whenever powered.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $24.99
- Pricier than about 63% of the 8,339 comparable items (median $19.99).
- Fan size 25 mm
- Lower than about 99% of the 1,114 comparable items (median 120 mm).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | 3ccooler.com |
| Product line | DFS251012H |
| Model name | DFS251012H |
| Product color | Black |
| Power | |
| Power input connector | 2 Pin |
| Size & build | |
| Fan size | 25 mm |
| Bearing design | Ball |
| Product dimensions | 25 × 10 mm |
| More details | |
| LED lighting | Non-LED |
Questions about this item
Will the 25mm x 25mm x 10mm frame fit my router's fan slot?
The fan measures 25mm square and 10mm thick, so it matches any 2510 mounting pattern.
How do I connect the 2-pin 12V power lead correctly?
Plug the two-wire connector onto the 12V header with the red wire to positive and black to ground; reversing them will prevent the fan from spinning.
When should I plan to replace the ball-bearing fan?
Ball bearings typically run for years; replace the unit if noise increases or airflow drops noticeably.
More in PC Cooling Fans
Similar items
Noctua NF-A14 iPPC-2000 PWM 140mm 2000 RPM case fan
- 140 × 140 × 25 mm
- 1 Fan
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
BGears b-BlasterPWM 120x38 case fan 38mm 1300-6500 RPM 318 CFM
- 1 Fan
- Case Fan
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Antec NOVA 120 120mm case fan fluid dynamic bearing 4-pin PWM
- 120 mm
- 1 Fan





