We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 100mm case fan with 3-wire connector and 2-ball bearing

Zyvpee

Zyvpee E1033H12B7AP-B6 100mm 3-wire case fan

SKU CH-GZ0K-2088Z

A 100 mm case fan with dual ball bearings and a three-wire 12 V connection for turbo cooling

  • Fan size100 mm
  • Bearing design2 Ball
  • Power input connector3 Wires
  • LED lightingNon-LED
  • Product typeCase Fan
  • Product colorBlack
  • 100 mm diameter moves more air per revolution
  • 2-ball bearing reduces friction for longer service life
  • 3-wire connector reports speed to the motherboard
  • 12 V 0.59 A draws modest power from standard headers
  • 97 × 33 mm frame fits tight 10 cm mounting slots

100 mm 3-wire case fan

The Zyvpee E1033H12B7AP-B6 is a 100 mm case fan built for system cooling. It runs on 12 V DC and draws 0.59 A through a 3-wire power connector. The frame measures 97 by 33 mm and uses a two-ball bearing for durability.

Suits builds needing a 100 mm 3-wire intake

This fan fits any chassis with a 100 mm mounting pattern and a 3-pin header. Builds that require PWM speed control via a 4-pin header cannot use the 3-wire connector. Buyers who need addressable lighting or a different frame thickness should look elsewhere.

3-wire power connector decides compatibility

The 3-wire connector supplies power and tachometer feedback but not PWM control. Motherboards with only 4-pin headers will run the fan at full speed unless voltage control is supported. Verify the header type before ordering.

How it compares

Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.

Price $59.99
Pricier than about 90% of the 8,339 comparable items (median $19.99).
Fan size 100 mm
Lower than about 67% of the 1,114 comparable items (median 120 mm).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand name3ccooler.com
Product lineE1033H12B7AP-B6
Model nameE1033H12B7AP-B6
Product typeCase Fan
Product colorBlack
Power
Power input connector3 Wires
Size & build
Fan size100 mm
Bearing design2 Ball
More details
LED lightingNon-LED

Questions about this item

How much heat and noise does the 0.59 A current draw create during all-day use?

The fan draws 0.59 A at 12 V, which equals roughly 7 W of power. That level is typical for a 100 mm dual-ball-bearing cooler and runs warm but not hot; expect a moderate airflow hum rather than a loud whine.

What connector must my motherboard or fan controller provide for the 3-wire plug?

A standard three-pin 12 V header supplies power and a tachometer signal; no PWM pin is present, so speed is controlled by voltage.

Will the 97 × 33 mm frame line up with the 100 mm mounting holes on my existing chassis?

Yes — the 97 mm square body matches the common 100 mm hole pattern, so it bolts directly into the same cut-outs used by your current 100 mm fans.

More in PC Cooling Fans

Similar items