Zyvpee EFB0612MA 6010 12V .12A 3-wire case fan
A 60 mm by 10 mm case fan with ball bearing, 12 V, 0.12 A draw and a three-wire connector
- Bearing designBall
- Power input connector3 Wires
- LED lightingNon-LED
- Product typeCPU Cooler Fan
- Product colorBlack
- Product dimensions60 × 10 mm
- Compact 60×10 mm design fits tight builds
- 12 V 0.12 A draws minimal power
- Ball bearing ensures durable, quiet operation
- Three-wire connector enables speed monitoring
- Non-LED black finish suits any colour scheme
Zyvpee EFB0612MA 6010 12V fan
This 60 mm by 10 mm case fan runs on 12 V at 0.12 A and uses a three-wire connector. It is built with a ball bearing for continuous operation. The unit suits compact chassis or CPU coolers that accept a 6010 form factor.
Capacity and headroom
The fan fits 60 mm mounts where space is limited to 10 mm depth. It delivers airflow for low-power processors or auxiliary cooling zones. It will not satisfy high-TDP coolers that demand larger frames or higher static pressure.
Three-wire power connector
The 3-wire lead provides power and a tachometer signal for motherboard monitoring. It does not support PWM speed control, so voltage regulation is required for variable speed. Verify that your header supplies 12 V and reads a third-wire RPM signal.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $24.99
- Pricier than about 63% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | 3ccooler.com |
| Product line | EFB0612MA |
| Model name | EFB0612MA |
| Product type | CPU Cooler Fan |
| Product color | Black |
| Power | |
| Power input connector | 3 Wires |
| Size & build | |
| Bearing design | Ball |
| Product dimensions | 60 × 10 mm |
| More details | |
| LED lighting | Non-LED |
Questions about this item
Will the 60 mm frame with 10 mm depth and three-wire 12 V connector fit the mounting holes and header on my older motherboard?
The fan measures 60 by 10 mm and uses a standard three-wire 12 V connector, matching the common 6010 mounting pattern found on many legacy boards.
How can I confirm the ball-bearing fan is spinning correctly once installed?
Connect the three-wire lead to a 12 V header; the tachometer wire will report RPM to the BIOS or monitoring software so you can verify operation.
Does the package include mounting screws or a 3-pin-to-4-pin adapter, or must I buy them separately?
Only the 60 mm black non-LED fan with three-wire lead is supplied; screws and any adapter cables are not included.
More in PC Cooling Fans
Similar items
Noctua NF-A14 iPPC-2000 PWM 140mm 2000 RPM case fan
- 140 × 140 × 25 mm
- 1 Fan
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
BGears b-BlasterPWM 120x38 case fan 38mm 1300-6500 RPM 318 CFM
- 1 Fan
- Case Fan
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Antec NOVA 120 120mm case fan fluid dynamic bearing 4-pin PWM
- 120 mm
- 1 Fan





