Zyvpee F9733B12LE 97mm 12V 0.72A 3-wire blower case fan
A 97 mm blower fan with a 3-wire power connector runs on 12 V and draws 0.72 A
- Fan size100 mm
- Bearing designBall
- Power input connector3 wires
- LED lightingNon-LED
- Product typeCase Fan
- Compatible withCase
- Blower design targets airflow through tight spaces
- 12 V 0.72 A draws modest power from a 3-wire header
- Ball bearing supports continuous operation with reduced friction
- 97 mm by 33 mm frame fits compact 100 mm mounts
- Non-LED black finish keeps the build visually clean
Compact blower for tight cases
The Zyvpee F9733B12LE is a 97 mm by 33 mm blower fan built for small-form-factor cases. It runs on 12 V and draws 0.72 A through a standard 3-wire power connector. The ball-bearing motor and non-LED black frame suit builders who need directed airflow without lighting.
Replaces larger axial fans when space is limited
Swap this blower in when a 100 mm axial fan cannot fit or when components block straight-through airflow. The 10 cm blower wheel pushes air across heatsinks and voltage-regulator zones that traditional fans miss. The upgrade is worth it when clearance is under 33 mm or when ducting is required.
Simple three-wire fit with polarity care
Mount the 97 mm square frame using the four corner holes and plug the 3-wire connector into any 12 V fan header. The 10 cm lead is short, so plan routing before final assembly. The common mistake is reversing the yellow sense wire, which stops speed reporting but not rotation.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $26.99
- Pricier than about 68% of the 8,339 comparable items (median $19.99).
- Fan size 100 mm
- Lower than about 67% of the 1,114 comparable items (median 120 mm).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Zyvpee |
| Product line | F9733 |
| Model name | F9733B12LE |
| Product type | Case Fan |
| Product color | Black |
| Power | |
| Power input connector | 3 wires |
| Size & build | |
| Fan size | 100 mm |
| Bearing design | Ball |
| Product dimensions | 97 × 33 mm |
| Compatibility | |
| Compatible with | Case |
| In the box | |
| In the box | Refer to title |
| More details | |
| LED lighting | Non-LED |
Questions about this item
Will the 97 mm by 33 mm frame fit my case's blower slot?
The fan measures 97 mm square by 33 mm thick, so verify your case has a matching cut-out and mounting holes before ordering.
How do I connect the 3-wire power lead correctly?
Plug the 3-wire connector into a 12 V fan header on the motherboard or controller; the third wire carries the tachometer signal for speed monitoring.
When should I expect to service the ball bearing?
Ball bearings typically run for years; clean dust from the blower fins periodically and replace the fan if noise or vibration increases.
More in PC Cooling Fans
Similar items
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
BGears b-Blaster 80 80mm 3500 RPM 62 CFM 39 dBA 3-pin case fan
- 1 Fan
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Thermaltake SWAFAN GT14 140mm case fan CL-F157-PL14BL-A
- 1 Fan
- No Controller





