Zyvpee HY60N-05A-P801 5V 0.28A 3-pin blower 67mm

Compact 5 V blower for tight builds

The Zyvpee HY60N-05A-P801 is a 67 mm square DC blower that runs on 5 V and draws 0.28 A through a 3-pin connector. Its hydraulic bearing keeps noise low while directing airflow through a narrow exhaust slot. The non-LED black frame suits notebook coolers, small-form-factor PCs or any enclosure where a radial fan fits better than an axial one.

Check voltage header and mounting holes

Verify that your board or controller provides a 5 V 3-pin header; a 12 V header will overspeed the motor and shorten its life. Measure the 67 mm by 67 mm footprint and 12 mm thickness against the available cavity and screw pattern. The three-wire lead supplies tach feedback but no PWM control, so speed is regulated by voltage alone.

Steady airflow under continuous duty

Hydraulic bearing lubrication maintains consistent RPM during extended operation without the wear spikes seen in sleeve alternatives. The blower wheel sustains static pressure across the 12 mm depth, moving heat through restricted channels rather than stalling. Expect stable thermal performance in pass-through heatsink stacks or ducted notebook coolers running for hours at a time.