Zyvpee KD1206PTS1 6025 12V 1.8W 2-Pin Sleeve Bearing Case Fan
60 mm sleeve-bearing case fan runs at up to 1600 RPM with a 2-pin 12 V connector
- Bearing designSleeve Bearing
- Rotational speed<1,600 RPM
- Power input connector2 Pin
- LED lightingNon-LED
- Product typeCPU Cooler Fan
- Product colorBlack
- Compact 60 mm frame fits tight builds
- 12 V 1.8 W draw keeps power use low
- Sub-1600 RPM sleeve bearing runs quietly
- Two-pin connector plugs straight into legacy headers
- Non-LED black design stays invisible in dark cases
Compact 60 mm case fan
The Zyvpee KD1206PTS1 is a 60 mm by 25 mm case fan built for tight chassis spaces and targeted CPU cooling. It runs on a 12 V supply and draws 1.8 W through a simple two‑pin connector. The black, non‑LED frame keeps the look understated for office or home builds.
1600 RPM ceiling and sleeve bearing
At under 1600 RPM the fan moves enough air for low‑power processors and auxiliary airflow duties. The sleeve bearing keeps acoustic output low at idle but will show wear sooner than ball‑bearing alternatives under continuous high‑speed operation. Headroom disappears quickly when cooling loads exceed modest thermal envelopes.
Two‑pin power and fixed speed
The two‑pin header delivers constant voltage, so speed cannot be modulated by PWM or voltage curves. Builders must ensure the motherboard or fan controller supplies a steady 12 V line and accept that the fan runs at its single rated speed. This simplicity frees a four‑pin header for a PWM‑controlled component elsewhere in the loop.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $20.99
- Typical for this category: the median of 8,339 items is $19.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Zyvpee |
| Product line | KD1206PTS1 |
| Model name | KD1206PTS1 |
| Product type | CPU Cooler Fan |
| Product color | Black |
| Performance | |
| Rotational speed | <1,600 RPM |
| Power | |
| Power input connector | 2 Pin |
| Size & build | |
| Bearing design | Sleeve Bearing |
| Product dimensions | 60 × 25MM |
| More details | |
| LED lighting | Non-LED |
Questions about this item
Will the 60 mm frame and 2-pin connector fit the same mounting holes and header as my current 6025 sleeve-bearing fan?
Yes, the 60*25 mm dimensions and 2-pin power connector match the standard 6025 form factor, so it drops into existing screw holes and plugs straight into the same motherboard or controller header.
How can I confirm the KD1206PTS1 is spinning at the rated speed once installed?
The fan is specified at under 1600 RPM; after power-up, check the RPM reading in BIOS or a hardware-monitoring utility — it should report a value below that figure.
Does the box include mounting screws or a 2-pin to 3-pin adapter, or must I buy them separately?
The supplied unit is the fan only; mounting screws and any pin-count adapters are not included and need to be sourced separately.
More in PC Cooling Fans
Similar items
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
DELTA ELECTRONICS AFB1212GHE-CF00 120mm 38mm 5200 RPM 240.96 CFM 62 dBA case fan
- 1 Fan
- 38 mm
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Cooler Master MFW-B2DN-17NPA-R1 MF120 Lite ARGB 120mm case fan
- 1 Fan
- Case Fan





