We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 70×25 mm 3-pin case fan with maglev bearing

Zyvpee

Zyvpee KDE1207PTV1 70×25 mm 3-pin 12 V 1.4 W case fan

SKU CH-AGPZ-TV7D3

A 70×25 mm Maglev case fan running below 1600 RPM with a 3-pin 12 V 1.4 W connector for CPU cooler mounting

  • Bearing designMaglev
  • Rotational speed<1,600 RPM
  • Power input connector3 Pin
  • LED lightingNon-LED
  • Product typeCPU Cooler Fan
  • Compatible withCPU Cooler
  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.4 W power draw keeps energy use low
  • 70 mm × 25 mm frame fits standard 7025 mounts
  • Three-pin connector enables direct motherboard control
  • Sub-1600 RPM speed balances airflow and noise

Compact 70 mm maglev fan for CPU coolers

The Zyvpee KDE1207PTV1 is a 70 by 25 millimetre case fan built for CPU cooler mounting. It runs on 12 volts and draws 1.4 watts through a three-pin power connector. The maglev bearing keeps friction low while the black non-LED frame suits understated builds.

Three-pin voltage control limits speed precision

The 3-pin connector adjusts fan speed by varying voltage rather than a PWM signal. This means the fan cannot hold a target RPM as tightly as a four-pin design and may not spin down to zero. Builders who need fine-grained curves or semi-passive operation should note this constraint.

1600 RPM ceiling defines thermal headroom

Maximum rotational speed is rated below 1600 RPM, setting the upper bound for airflow and static pressure. If your cooler demands higher RPM to meet its TDP target, this fan will not deliver enough cooling capacity.

How it compares

Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.

Price $23.99
Pricier than about 60% of the 8,339 comparable items (median $19.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameZyvpee
Product lineKDE1207PTV1
Model nameKDE1207PTV1
Product typeCPU Cooler Fan
Product colorBlack
Performance
Rotational speed<1,600 RPM
Power
Power input connector3 Pin
Size & build
Bearing designMaglev
Product dimensions70 × 20MM
Compatibility
Compatible withCPU Cooler
More details
LED lightingNon-LED

Questions about this item

Which Zyvpee KDE1207PTV1 version should I choose for my CPU cooler?

This model is a single 70 mm × 25 mm Maglev fan rated at 12 V, 1.4 W with a 3-pin connector; there are no alternative capacities or versions listed, so this exact specification is the only one to select.

What does the <1600 RPM figure mean once the fan is installed?

The fan will spin at up to 1600 revolutions per minute, delivering airflow for CPU cooling while the Maglev bearing keeps noise low at that speed.

What does the 3-pin connector cap in practice?

The 3-pin DC connector allows the motherboard to monitor speed via the tach wire and vary voltage for basic speed control, but it does not support PWM duty-cycle regulation.

More in PC Cooling Fans

Similar items