Zyvpee MW-410M12S 40mm 4010 12V 0.09A 2-pin case fan
A 40 mm sleeve-bearing case fan running at up to 1600 RPM on 12 V with a 2-pin connector
- Bearing designSleeve bearing
- Rotational speed<1,600 RPM
- Power input connector2 Pin
- LED lightingNon-LED
- Product typeCPU Cooler Fan
- Product colorBlack
- Compact 40 × 10 mm frame fits tight chassis spaces
- 12 V 0.09 A draw keeps power use low
- 2-pin connector enables simple motherboard hookup
- Sleeve bearing runs below 1600 RPM for quiet operation
- Non-LED black design suits industrial and IPC builds
Compact 40 mm cooling fan
The Zyvpee MW-410M12S is a 40 x 10 mm case fan built for tight industrial control motherboards and IPC chassis. It draws 0.09 A at 12 V through a simple two-pin connector.
1600 RPM ceiling with sleeve bearing
At under 1600 RPM the fan moves modest airflow suited to low-heat embedded boards or auxiliary component cooling. The sleeve bearing keeps noise low but limits continuous high-temperature duty cycles.
Two-pin DC power for space-constrained builds
The 2-pin lead plugs directly into a 12 V header on industrial motherboards without PWM control. Its 4010 frame frees up room around dense I/O headers while providing basic active cooling.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $23.99
- Pricier than about 60% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | 3ccooler.com |
| Product line | MW-410M12S |
| Model name | MW-410M12S |
| Product type | CPU Cooler Fan |
| Product color | Black |
| Performance | |
| Rotational speed | <1,600 RPM |
| Power | |
| Power input connector | 2 Pin |
| Size & build | |
| Bearing design | Sleeve bearing |
| Product dimensions | 40 × 10 mm |
| More details | |
| LED lighting | Non-LED |
Questions about this item
Will the 40 mm frame and 2-pin connector fit the same mounting holes and header on my older industrial motherboard?
The fan measures 40 by 10 mm and uses a standard 2-pin power connector, matching the common 4010 footprint found on many legacy IPC boards.
How can I confirm the MW-410M12S is spinning correctly once installed?
With 12 V applied the sleeve-bearing motor should run below 1600 RPM; you can verify rotation visually or by feeling airflow at the 40 mm exhaust.
Does the package include only the bare fan or are screws and a molex adapter also supplied?
The listing describes the MW-410M12S unit itself — 12 V, 0.09 A, two-wire, non-LED, black — so mounting screws and any connector adapters must be sourced separately.
More in PC Cooling Fans
Similar items
Noctua NF-S12A ULN 120mm case fan 800/600 RPM
- 1 Fan
- No Controller
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Corsair ML140 PRO LED CO-9050047-WW 140mm case fan RED
- 1 Fan
- No Controller





