Zyvpee NIDEC 4210 TA150DC C34247-16 CQ 5V 0.13A 2-Wire 42x10mm Case Fan
Compact 42×10 mm ball-bearing case fan runs on 5 V at 0.13 A with a two-wire connector
- Bearing designBall
- Power input connector2 Wires
- LED lightingNon-LED
- Product typeCase Fan
- Product colorBlack
- Key features4CM Case Fan
- Compact 42 mm frame fits tight chassis spaces
- Ball bearing ensures durable, low-friction rotation
- 5 V 0.13 A draw keeps power load minimal
- Two-wire connector simplifies motherboard installation
- Non-LED black design maintains a clean, stealthy look
Zyvpee NIDEC 4210 42x10mm Case Fan
This 42 by 10 millimetre case fan uses a ball bearing and runs on a two-wire five volt connection drawing zero point one three amps. It is built for tight spaces where a standard square frame will not fit. The black non-LED housing keeps the look neutral inside any chassis.
Upgrade from larger or sleeve-bearing fans
Builders replacing a noisy sleeve-bearing unit or a thicker frame that blocks nearby components will notice the thinner profile and longer bearing life. The jump is worth it when clearance is measured in millimetres and a 42 by 10 footprint is the maximum the layout allows.
Check voltage header and mounting holes
Verify the board or controller supplies a five volt two-pin header rated for at least zero point one three amps. Confirm the chassis has 42 millimetre hole spacing or a compatible bracket before ordering.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $24.99
- Pricier than about 63% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Zyvpee |
| Product line | C34247-16 |
| Model name | C34247-16 |
| Product type | Case Fan |
| Product color | Black |
| Power | |
| Power input connector | 2 Wires |
| Size & build | |
| Bearing design | Ball |
| Product dimensions | 42 × 10 mm |
| More details | |
| LED lighting | Non-LED |
Questions about this item
Will the 42 mm by 10 mm frame line up with the mounting holes on my board?
The fan measures 42 mm by 10 mm; verify your board's hole spacing against those dimensions before fitting.
How do I connect the two-wire lead without reversing polarity?
The red wire carries 5 V at 0.13 A and the black wire is ground; match them to the header's markings before powering on.
When should I plan to replace the ball-bearing fan?
Ball bearings typically run for tens of thousands of hours; replace the unit if noise increases or airflow drops noticeably.
More in PC Cooling Fans
Similar items
Noctua NF-A14 iPPC-2000 PWM 140mm 2000 RPM case fan
- 140 × 140 × 25 mm
- 1 Fan
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
BGears b-BlasterPWM 120x38 case fan 38mm 1300-6500 RPM 318 CFM
- 1 Fan
- Case Fan
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Antec NOVA 120 120mm case fan fluid dynamic bearing 4-pin PWM
- 120 mm
- 1 Fan





