We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 40mm square cooling fan with three wires and maglev bearing

Zyvpee

Zyvpee Sunon KD1204PKV2 40mm 12V 0.8W 3-pin case fan

SKU CH-B895-WV94T

40 mm Maglev case fan runs at up to 1600 RPM on 12 V, drawing .8 W through a 3-pin connector

  • Bearing designMaglev
  • Rotational speed<1,600 RPM
  • Power input connector3 Pin
  • LED lightingNon-LED
  • Product typeCase Fan
  • Product colorBlack
  • Compact 40 mm frame fits tight chassis spaces
  • Maglev bearing reduces friction for quieter operation
  • 12 V 0.8 W draw keeps power use low
  • 3-pin connector enables simple motherboard control
  • Sub-1600 RPM speed balances airflow and noise

Compact 40 mm Maglev Fan

The Zyvpee Sunon KD1204PKV2 is a 40 mm square case fan built around a magnetic-levitation bearing. It targets builders who need a thin 20 mm profile for tight spaces such as small-form-factor PCs, router enclosures or switch chassis. The 3-pin DC connector provides straightforward voltage control without PWM complexity. Non-LED black housing keeps the appearance neutral inside any chassis.

Thermals, Noise and Power

Rated at 12 V and .8 W, the fan spins below 1600 RPM to move air through restricted venting. Maglev construction reduces mechanical contact, lowering audible noise compared with traditional sleeve or ball bearings at similar speeds. Low current draw allows operation from standard motherboard headers or 12 V rail taps without overloading the supply. DC voltage regulation lets the system scale speed to thermal load.

What the Bundle Changes

The package includes only the fan unit with its pre-attached 3-pin lead; no mounting screws, adapters or speed controllers are supplied. Installers must source appropriate 40 mm fasteners or vibration mounts for their specific chassis. Absence of bundled accessories keeps cost down but requires planning for secure attachment in thin-wall enclosures. No software or firmware is involved.

How it compares

Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.

Price $19.99
Typical for this category: the median of 8,339 items is $19.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameZyvpee
Product lineKD1204
Model nameKD1204PKV2
Product typeCase Fan
Product colorBlack
Performance
Rotational speed<1,600 RPM
Power
Power input connector3 Pin
Size & build
Bearing designMaglev
Product dimensions40 × 20 mm
More details
LED lightingNon-LED

Questions about this item

How do I connect the 3-pin connector to my motherboard or controller?

Plug the 3-pin plug into a 12 V fan header, aligning the keyed tab; the third wire reports speed but does not enable PWM control.

What part of the fan wears out first and will eventually need replacement?

The Maglev bearing is the only moving component; over time it can develop noise or play, at which point the whole fan is replaced.

At what speed does the fan hit its maximum airflow limit under continuous load?

The fan tops out below 1600 RPM, so sustained airflow is capped at that rotational speed.

More in PC Cooling Fans

Similar items