Zyvpee ZB0506PGV1-6A Maglev CPU Cooler Fan 4 Pin 1600 RPM
Maglev-bearing 4-pin CPU cooler fan spins up to 1600 RPM for Dell Vostro 1014 and 1088 notebooks
- Bearing designMaglev
- Rotational speed<1,600 RPM
- Power input connector4 Pin
- LED lightingNon-LED
- Product typeCPU Cooler Fan
- Product color2-Tone
- Maglev bearing reduces friction for quieter operation
- 4-pin PWM connector enables precise speed control
- 1600 RPM maximum speed delivers strong airflow
- Designed for Dell Vostro 1014 and 1088 models
- DC blower design directs air over heatsink efficiently
Dell Vostro 1014 and 1088 fit
This Maglev CPU cooler fan is built as a direct replacement for the Dell Vostro 1014 and 1088 notebooks. It runs on a 5 V, 0.35 A supply and connects through a four‑wire PWM header. The blower‑style impeller pushes air through the heatsink to keep the processor within thermal limits.
Upgrade from a worn original cooler
When the factory fan becomes noisy, spins below its rated speed or fails completely, this unit restores the intended airflow. The jump is worth it if the laptop throttles under load or the original bearing has developed rattle. It matches the OEM form factor so no chassis modification is required.
Straightforward drop‑in installation
Align the screw holes with the heatsink, plug the four‑pin connector into the motherboard header and secure the fan. The most common issue is routing the thin cable so it does not foul the fan blades or the keyboard ribbon. Verify the blade spins freely before closing the case.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $22.99
- Pricier than about 58% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Zyvpee |
| Product line | ZB0506PGV1-6A |
| Model name | ZB0506PGV1-6A |
| Product type | CPU Cooler Fan |
| Product color | 2-Tone |
| Performance | |
| Rotational speed | <1,600 RPM |
| Power | |
| Power input connector | 4 Pin |
| Size & build | |
| Bearing design | Maglev |
| More details | |
| LED lighting | Non-LED |
Questions about this item
Will the 4-pin connector on this ZB0506PGV1-6A cooler fit the motherboard header on my Dell Vostro 1014?
Yes, the 4-wire connector is specified for the Vostro 1014 and 1088 models, matching the original 0Y34KC and 3CVM8FAWI20 part numbers.
What is the correct way to seat this maglev blower so the screws don't strip the plastic housing?
Align the four mounting holes with the heatsink posts, start each screw by hand until finger-tight, then give a final quarter-turn with a small Phillips driver — over-torquing cracks the frame.
How often should I clean dust from the maglev bearing in this 5 V 0.35 A blower?
Blow compressed air through the intake vents every six months; the sealed maglev bearing itself needs no lubrication or replacement during the cooler's service life.
More in PC Cooling Fans
Similar items
Noctua NF-P14s redux-1500 PWM 140 mm 1500 RPM case fan
- 140 × 140 × 25 mm
- 1 Fan
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Lian Li UF-SL120-1B 120mm ARGB case fan black single
- 1 Fan
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Corsair CO-9050084-WW AF120 LED 2018 Blue 3-Pack case fan
- 3 Fans
- No Controller





