Grip Tape and Board Add-Ons: Carry Bags and Tapes

Carry bags for self-balancing scooters: measure the wheel and the body

Most bags in this category are made for self-balancing scooters, and they are sized by wheel diameter, with 6.5, 8 and 10 inch versions listed. A bag for the wrong wheel size will not close or will let the scooter slide about. Compare the bag's inside length and width with the scooter's footprint, not only the wheel size, because models with the same wheel size can differ.

Look at weight and strap design too. A bag of around 370 g adds little to the load, and shoulder and hand straps matter when carrying a scooter up stairs. Waterproof or padded fabrics protect against rain and scuffs. Bags are cut for the scooter shape, so one made for a self-balancing scooter will not suit a kick scooter or a skateboard.

Tape and adhesives: grip tape, masking tape and what each is for

Real grip tape has a coarse abrasive surface and a strong adhesive back, and it is cut to fit a deck, usually from a sheet about 9 inches wide. The masking tape and high-temperature flue tape in this listing are general hardware tapes: masking tape protects surfaces while painting, and flue tape seals hot ducts. They give no traction and are not a substitute.

Check the width and length in inches, the temperature rating, and whether the tape leaves residue when removed. For boards and scooters, choose a tape made for the surface it will sit on. Tools and protective covers are sold by model, so match the model name before choosing, and treat color as purely cosmetic.

Questions about Grip Tape and Board Add-Ons: Carry Bags and Tapes

What size bag fits a self-balancing scooter?

Match the wheel diameter listed on the bag, such as 6.5, 8 or 10 inches, then compare the inside length and width with your scooter. Models with the same wheel size can differ in body shape, so check the dimensions.

Can I use masking tape instead of grip tape?

No. Masking tape is smooth and made for painting, so it gives no traction and peels off. Grip tape has an abrasive surface and a strong adhesive designed for decks and shoe contact.

How much grip tape does a skateboard deck need?

A standard sheet about 9 inches wide by 33 inches long covers most decks up to roughly 8.5 inches wide. Trim the excess along the deck edge with a blade. Check your deck width before choosing a sheet.