3DHoJor High-Speed PLA Filament 1.75mm 300mm/s 1kg Cardboard Spool Black

High-Speed PLA Filament 1.75mm

3DHoJor High-Speed PLA filament is a 1.75mm polylactic acid spool rated for printing speeds up to 300mm/s. It targets makers who want shorter build times on compatible FDM printers without sacrificing surface quality. The 1kg cardboard spool arrives vacuum-sealed with desiccant to keep the material dry and ready for immediate use. It suits both beginners and experienced operators looking for reliable high-throughput printing.

1kg Capacity and Dimensional Tolerance

The 1kg spool provides enough filament for multiple medium-sized models or a single large project before a changeover is needed. Dimensional accuracy is held to +/- 0.03mm, reducing the risk of extruder jams and ensuring consistent flow across long prints. Mechanical winding and manual inspection minimise tangles and overlap on the spool. Very large or continuous production runs will eventually require additional spools to avoid interruption.

Thermal Settings and Print Behaviour

Recommended nozzle temperature ranges from 190 to 230°C with 215°C suggested as a starting point. Heated bed temperature should sit between 45 and 60°C while the part cooling fan runs at 100% for best overhang performance. Print speeds from 40 up to 300mm/s are supported on capable high-speed machines. The material prints with minimal warping and no noticeable odour during normal operation.