Klein Tools 85191 Conduit Reaming Screwdriver 5/16 tip 13 19 25 mm
- Card
- * Hooded-blade desi…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Silver polyester film tape with acrylic adhesive, 2 in wide by 72 yd long, withstands -60 to 300 °F
The 3M 850 is a single-sided silver polyester film tape with an acrylic adhesive. It comes in a continuous roll measuring 2 in wide by 72 yd long on a 1 1/2 in core. The tape is designed for electrical insulation and general-purpose holding where a thin, conformable backing is required.
The tape operates continuously from -60 Degrees F up to 300 Degrees F without losing adhesion or backing integrity. Its 1.9 mil thickness provides consistent dielectric strength across that range. The acrylic adhesive maintains a 30 oz/in bond to steel while the polyester backing delivers 28 lb-in tensile strength under prolonged stress.
This film tape upgrades from bulkier cloth or rubber electrical tapes when a thinner profile and higher temperature rating are needed. The jump is worth it for harness wrapping, coil insulation or masking where 1.9 mil thickness reduces build-up and the 300 Degrees F limit prevents adhesive bleed. It is not for applications requiring a thicker cushioning layer or a non-silver colour code.
Measured against everything we stock in Electrical Trade Tools & Kits, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | 3M |
The 1.9 mil polyester backing with acrylic adhesive is rated for continuous performance up to 300 °F and down to -60 °F, maintaining its 28 lb-in tensile strength and 30 oz/in adhesion across that range.
The acrylic adhesive bonds directly to clean, dry surfaces without a separate primer; ensure the substrate is free of oil, dust and moisture for full 30 oz/in adhesion.
Yes, the roll uses a 1 1/2 in core diameter, which matches the common industry size for 2 in wide tape dispensers.
More in Electrical Trade Tools & Kits
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?