3M M6-12R/SK Ring Terminal 6 AWG 1000 V
A 6 AWG ring terminal rated for 1,000 V with a 1/2 in stud size, tin-plated copper barrel and CSA/UL certification
- Product typeElectrical Connectors
- Rated for 1000 V maximum voltage
- Operates up to 347 Degrees F temperature
- Tin-finished copper contact resists corrosion
- Brazed barrel construction adds mechanical strength
- CSA Certified and UL Listed for safety
6 AWG Ring Terminal for 1/2 in Studs
This 3M M6-12R/SK ring terminal connects 6 AWG copper building wire, fixtures or signs to a half-inch stud. The barrel accepts only 6 AWG conductors and is crimped for a permanent joint. It suits installers who need a single-wire termination at up to 1,000 V.
1,000 V and 347 °F Operational Ceiling
The terminal is rated for a maximum of 1,000 volts and a maximum operating temperature of 347 degrees Fahrenheit. These limits define the highest voltage and heat the copper barrel and tin finish can withstand in service. Exceeding either value risks insulation breakdown or mechanical failure.
Brazed Barrel with Tin-Plated Copper
The barrel is brazed for structural integrity and measures 0.25 in inside diameter by 0.39 in length. Tin-plated copper contacts resist corrosion while the bare finish leaves the conductor exposed for inspection. The 0.81 in tongue width matches standard half-inch stud hardware.
How it compares
Measured against everything we stock in Electrical Enclosures & Cabinets, at today’s prices. Recalculated every night.
- Price $219.99
- Pricier than about 89% of the 1,411 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | 3M |
| Product type | Electrical Connectors |
Questions about this item
How do I choose the right ring terminal for my wire gauge?
This terminal is built for 6 AWG wire only; the barrel accepts a single wire size so there is no capacity choice to make.
What does the 1,000 V rating mean when the terminal is installed?
It indicates the maximum voltage the connection can safely carry in a properly crimped joint.
What standard governs the 1/2 in stud size and what does it limit?
The 1/2 in stud size sets the bolt diameter the tongue fits; the terminal is CSA Certified and UL Listed for 1,000 V.
More in Electrical Enclosures & Cabinets
Similar items
HOFFMAN A14128CH electrical box 14 in H 8 in D
- Electrical Enclosur…
BFKK Outdoor Electrical Box 19.6" x 15.7" x 7.9" IP65
- Electrical Boxes





