We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue digital soldering iron with LED display, stand, and accessory case

60W 120V Soldering Iron Kit 21-in-1 Digital Display 5 Tips

SKU CH-TTNA-267WN

A 60 W, 120 V digital soldering iron with a 200–500 °C range and a 21-piece accessory set including five 900M tips, desoldering pump, wire stripper and solder wire

  • Power rating60 W
  • Fit and compatibilityAdhesives; Enamels; Epoxies
  • Certifications and standardsLead Free Compliant
  • Digital display shows exact temperature 200–500°C
  • 60W ceramic heater reaches working heat fast
  • 21-piece kit includes iron, pump, wire, tips
  • Five 900M tips handle fine to broad joints
  • Heat-resistant silicone grip reduces slippage during use

Complete 21-in-1 Soldering Kit

This 21-in-1 kit bundles a 60 W digital soldering iron with 15 extra accessories including five 900M tips, a desoldering pump, 0.8 mm solder wire, tweezers, flux paste, stand, sponge, wire stripper, screwdrivers, heat-shrink tubes and a mini PCB. The LED display shows the current temperature clearly for precise control. It is designed for hobbyists, students and professionals tackling electronics repair, circuit board work, jewelry making and general DIY projects.

60 W Adjustable Temperature Range

The ceramic heating element reaches 200 to 500 °C (392 to 932 °F) and heats quickly, while four ventilation holes aid heat dissipation. The heat-resistant silicone grip reduces slippage during extended use. This power level handles through-hole components, wire splices, connector repairs and small SMD work comfortably, but it runs out of thermal mass on large ground planes, heavy connectors or thick chassis metal that draw heat away faster than the 60 W tip can replenish it.

Upgrade from Basic Fixed-Temp Irons

Moving up from an unregulated pencil iron gives you repeatable temperature settings and a full accessory set in one box, removing the need to source tools separately. The jump is worth it when you start doing temperature-sensitive work such as IC replacement, fine-pitch soldering or lead-free joints that demand stable heat. It does not replace a high-wattage station for production rework on multilayer boards or jobs requiring rapid thermal recovery on large copper areas.

How it compares

Measured against everything we stock in Soldering Irons & Stations, at today’s prices. Recalculated every night.

Price $29.99
Pricier than about 56% of the 802 comparable items (median $25.99).

Specifications

Power
Power rating60 W
Compatibility
Fit and compatibilityAdhesives; Enamels; Epoxies
Environment & compliance
Certifications and standardsLead Free Compliant

Questions about this item

Can I run this 60 W 120 V iron on the same circuit as my older station without tripping the breaker?

The iron draws 60 W at 120 V AC ±25 % and 60 Hz, so it adds roughly half an amp to the branch circuit; total load depends on what else is plugged in.

How do I confirm the digital display is reading the true tip temperature after setup?

Set a value between 200 °C and 500 °C on the LED display, wait for the readout to stabilise, then touch a fresh solder wire to the 900M‑T tip — instant melt and flow means the tip is at the shown temperature.

Which of the 21 pieces are included and what must I supply myself?

The kit contains the digital soldering iron, five 900M tips (I, 2.4D, K, 3C, B), desoldering pump, 0.8 mm solder wire, tweezers, rosin flux paste, stand with cleaning sponge, mini wire stripper, mini screwdrivers, mini PCB and heat‑shrink tubes; you only need a 120 V outlet and the workpiece.

More in Soldering Irons & Stations

Similar items