A-Tech 16GB (4x4GB) DDR3 1600MHz CL11 240-Pin Desktop RAM
- 16 GB (4 × 4 GB)
- 240-Pin PC RAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 16GB dual-channel DDR3 kit running at 1866MHz with CL13 timing and 1.5V operation for desktop upgrades
Capacity 16GB (2 x 8GB)
Speed DDR3 1866 (PC3 14900)
This A-Tech kit supplies 16GB of DDR3 memory across two 8GB modules. It is built for desktop computers that accept 240-pin DIMMs and runs at 1866MHz with CL13 timing. The 1.5V voltage matches standard DDR3 requirements for compatible AMD and Intel platforms.
Before ordering, confirm your motherboard supports DDR3 DIMMs at 1866MHz and has two free 240-pin slots for dual-channel operation. Check the vendor’s qualified vendor list or manual for the exact speed and voltage compatibility. The kit is non-ECC and unbuffered, so it will not work in systems that require registered or ECC memory.
The modules operate at the standard 1.5V without a heat spreader, so they rely on case airflow for cooling. Under typical desktop workloads power draw stays within normal DDR3 limits and the memory runs silently. Ensure your chassis provides adequate ventilation around the DIMM slots to maintain stable temperatures.
Measured against everything we stock in Desktop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | A-Tech DDR3 Desktop Memory RAM |
| Model name | A-Tech 16 GB Kit (2 × 8 GB) PC3-14900 Desktop RAM |
| Part number | NE-SS-0656 |
| Total capacity | 16 GB (2 × 8 GB) |
| Product type | 240-Pin PC RAM |
| Performance | |
| Rated speed | DDR3 1866 (PC3 14900) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| Tested speed | 1866 |
| Tested timing | 13 |
| ECC support | No |
| Buffer type | Unbuffered |
| Kit configuration | Dual Channel Kit |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.5 V |
| Compatibility | |
| Recommended for | AMD & Intel Compatible |
Other versions of this model
The kit uses standard 240-pin DDR3 DIMMs at 1.5 V and runs at 1866 MHz with CL13 timing; if your board supports DDR3 1866/1867 and unbuffered non-ECC memory, the modules will fit and function.
Most DDR3 boards default to a lower JEDEC speed; enter the BIOS and set the memory frequency to 1866 MHz (PC3-14900) with timings of 13-13-13 at 1.5 V to match the tested specification.
This is a matched dual-channel pair (2 x 8 GB); adding a second kit of identical spec can work but may require manual timing adjustment and is not guaranteed to run at 1866 MHz on every platform.
More in Desktop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?