Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16GB DDR4 2400 SODIMM upgrades select 21.5 and 27-inch iMacs from 2017 and 2019
This 16GB DDR4 SODIMM is built for Apple iMac models from Mid 2017 and 2019, including the 21.5-inch 4K and 27-inch 5K configurations. It matches the factory DDR4 2400 specification so the system recognises it immediately without firmware changes. The module suits owners who want a single-stick upgrade to the maximum supported slot capacity.
The module operates at the standard DDR4 voltage of 1.20V and is unbuffered non-ECC, so it draws the same power as the original memory. No heat spreader is fitted, keeping the profile low enough for the tight SODIMM slots in these iMacs. Under normal workloads the memory runs silently and adds no measurable thermal load to the compact enclosure.
The kit provides one 16GB stick organised as 2Rx8, running at DDR4 2400 (PC4-19200) with 260 pins. This density and rank configuration is the specific requirement for the compatible iMac models listed. Buyers needing ECC, registered DIMMs, or a different speed or voltage will not be able to use this module.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | A-Tech DDR4 Apple Mac RAM Memory Upgrades |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| ECC support | No |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Apple Mac Systems |
Power off and unplug the iMac, lay it screen-down on a soft cloth, remove the memory access door with a Phillips screwdriver, eject any existing modules by pushing the side levers outward, align the 260-pin notch on the new module, press firmly until the levers click back, then replace the door before reconnecting power.
No scheduled maintenance is required; the unbuffered non-ECC DDR4 SODIMM has no moving parts or batteries, so it typically lasts the life of the iMac unless a rare defect appears, in which case the lifetime warranty covers replacement.
The 2400 MHz DDR4 speed and 1.20 V voltage set the bandwidth ceiling, so prolonged maximum throughput tasks will hit the module's rated transfer rate before thermal throttling becomes a factor.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?