We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold edge connector, thin rectangular stick

A-Tech

A-Tech 16GB DDR4 2400 SODIMM CL17 1.2V Dell Latitude memory upgrade

SKU CH-TK6Q-552J2

A 16 GB DDR4 2400 SODIMM module with CL17 timing and 1.2 V operation, validated for Dell Latitude 3000, 5000 and 7000 series laptops

  • Total capacity16 GB
  • Rated speedDDR4 2400 (PC4 19200)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL17
  • Rated voltage1.2 V
  • Buffer typeUnbuffered

Capacity 16GB

  • 16 GB capacity expands multitasking headroom for demanding workloads
  • DDR4 2400 MHz speed accelerates data transfer and application loading
  • CL17 latency with 1.2 V operation balances responsiveness and efficiency
  • 260-pin SODIMM form factor fits Dell Latitude 3000, 5000, 7000 series laptops
  • Single module design simplifies installation without occupying extra slots

Dell Latitude DDR4 SODIMM upgrade

This 16 GB DDR4 2400 MHz SODIMM module is built for Dell Latitude 3000, 5000 and 7000 series laptops. It targets owners of models such as the 7400, 7300, 5500, 5400, 5300, 3500, 3400, 3310 and 3300 who need more memory for multitasking. The single 260-pin stick runs at 1.2 V with CL17 latency and requires no ECC support.

Replacing factory memory in supported Latitudes

The module upgrades systems that shipped with 4 GB or 8 GB of slower DDR4, letting the processor keep more data in fast memory instead of paging to storage. The jump is worth it when daily workloads — browser tabs, office suites, video calls — regularly push the original capacity limit and cause noticeable stutter. It will not help machines already running 16 GB or more, or any laptop outside the listed Latitude range.

Tool-free slot access on most models

Installation means opening the bottom cover, releasing the side clips and seating the module until it clicks; no soldering or firmware steps are required. What usually goes wrong is inserting the stick at the wrong angle so the gold contacts do not fully engage, or forgetting to reseat the cover screws, which leaves the module loose and causes boot failures.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $74.99
Cheaper than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $4.69 per GB
Cheaper than about 80% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameA-Tech
Product lineDell Latitude Compatible
Model name16 GB DDR4-2400 SODIMM for Dell Latitude 7400, 7300, 5500, 5400, 5300, 3500, 3400, 3310, 3300
Part numberNE-MS-0087
Total capacity16 GB
Product type260-Pin DDR4 SO-DIMM
Performance
Rated speedDDR4 2400 (PC4 19200)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL17
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Power
Rated voltage1.2 V
Compatibility
Compatible systemsDell Latitude 7400, 7300, 5500, 5400, 5300, 3500, 3400, 3310, 3300 Laptops
In the box
Included itemsOne Module
More details
VariantCompatible with Dell Latitude 7400, 7300, 5500, 5400, 5300, 3500, 3400, 3310, 3300

Other versions of this model

4 more in the same range

Questions about this item

Will the 260-pin DDR4 SO-DIMM fit the memory slot in a Dell Latitude 7400?

Yes, the 260-pin DDR4 SO-DIMM form factor matches the slot used in the Latitude 7400 and the other listed Latitude 3000, 5000 and 7000 series models.

What is the correct way to seat the module so the 260 pins make full contact?

Insert the module at about a 30-degree angle until the gold edge disappears, then press down firmly until both side clips click into the notches on the PCB.

Does the 1.2 V DDR4 module need any cleaning or thermal-pad replacement over time?

No routine maintenance is required; the module has no heat spreader and runs at standard JEDEC 1.2 V, so it can stay installed for the life of the laptop.

More in Model-Specific Memory Upgrades

Similar items