A-Tech 8GB DDR3 1600MHz ECC RDIMM 2Rx4 1.5V 240-Pin for HP Z420 Z620 Z820
- 8 GB
- 240-Pin DDR3 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR3 ECC registered kit with two 8 GB modules for HP Z420, Z620 and Z820 workstations
Capacity 16GB (2 x 8GB)
This 16 GB kit contains two 8 GB DDR3 registered DIMMs built for HP Z420, Z620 and Z820 workstations. It targets users who need error-correcting memory for stable operation in professional applications.
Each module is a 240-pin DDR3-1600 RDIMM running at 1.5 V with CL11 latency and a 2Rx4 organisation. The registered buffer reduces electrical load on the memory controller, allowing the workstation to populate all available slots. ECC circuitry detects and corrects single-bit errors without halting the system.
The kit upgrades systems shipped with lower-capacity or slower DDR3 modules, raising total capacity to 16 GB and setting the memory bus to PC3-12800 speed. It is not suitable for platforms that require unbuffered ECC UDIMMs or non-ECC memory, and it cannot be mixed with those module types.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | 2nd Gen. HP Z Workstation Compatible |
| Model name | 16 GB (2 × 8 GB) 2Rx4 PC3-12800 RDIMM for HP Z Workstation Z420, Z620, Z820 |
| Part number | NE-MS-0094 |
| Total capacity | 16 GB (2 × 8 GB) |
| Product type | 240-Pin DDR3 SDRAM |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.5 V |
| Compatibility | |
| Compatible systems | HP Z Workstation Z420, Z620, Z820 |
| In the box | |
| Included items | Two Modules |
| More details | |
| Variant | Compatible with HP Z Workstation Z420, Z620, Z820 |
Other versions of this model
The kit runs at DDR3-1600 CL11 with 2Rx4 registered ECC modules at 1.5 V; the workstation’s memory controller and BIOS set the practical sustained-throughput ceiling.
The modules have no heat spreader and draw 1.5 V at DDR3-1600; they add minimal heat and zero noise, relying on the chassis fans already present in the Z420, Z620 or Z820.
A Z420, Z620 or Z820 with free 240-pin DDR3 slots that support registered ECC memory and a BIOS configured for RDIMM operation.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?