We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

A-Tech

A-Tech 8GB (2x4GB) DDR3L 1333 ECC UDIMM 2Rx8 1.35V Server RAM

SKU CH-22PX-D75X5

Dual-channel 8 GB DDR3L ECC UDIMM kit with two 4 GB modules at 1333 MHz CL9, 1.35 V, 240-pin, dual-rank x8 for servers and workstations

  • Total capacity8 GB (2 × 4 GB)
  • Rated speedDDR3L 1333 (PC3L 10600)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL9
  • Rated voltage1.35 V
  • Buffer typeUnbuffered

Capacity 8GB (2 x 4GB)

Speed DDR3L 1333 (PC3L 10600)

  • 8GB dual-channel kit doubles bandwidth for server workloads
  • DDR3L 1333 MHz speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • 35 V low-voltage operation reduces power draw
  • 240-pin UDIMM form factor fits compatible server slots

8GB DDR3L ECC UDIMM Kit

This A-Tech kit supplies 8 GB of DDR3L memory as two 4 GB modules rated at 1333 MHz with CL9 latency. It is built for servers and workstations that require ECC unbuffered DIMMs operating at 1.35 V. The dual-rank x8 organisation supports dual-channel configurations on compatible platforms.

Compatibility Check Before Ordering

Verify that your system expressly supports DDR3 or DDR3L ECC unbuffered UDIMMs in a 240-pin form factor. Desktop and laptop platforms are not compatible with this memory type. Consult the motherboard or server manual for approved memory population rules and maximum supported capacity per slot.

Sustained-Load Behaviour

Under continuous workloads the modules maintain their rated 1333 MHz speed and 1.35 V operating point while ECC corrects single-bit errors in real time. The low-voltage design reduces thermal output during extended operation compared to standard 1.5 V DDR3. All chips are tested for stability across prolonged duty cycles.

How it compares

Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.

Price $29.99
Cheaper than about 90% of the 6,523 comparable items (median $188.99).
Total capacity 8 GB (2 × 4 GB)
Lower than about 80% of the 6,064 comparable items (median 32 GB).
Price per GB $3.75 per GB
Cheaper than about 83% of the 6,064 comparable items (median $7.25 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameA-Tech
Product lineA-Tech DDR3 Server Memory RAM
Model nameA-Tech 4 GB 2Rx8 PC3L-10600E
Total capacity8 GB (2 × 4 GB)
Performance
Rated speedDDR3L 1333 (PC3L 10600)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL9
ECC supportYes
Buffer typeUnbuffered
Memory rank2Rx8
Kit configurationDual Channel Kit
Power
Rated voltage1.35 V

Other versions of this model

5 more in the same range

Questions about this item

Does the kit include only the two 4 GB modules or are any brackets or cables supplied?

The kit contains two 4 GB DDR3L 1333 ECC UDIMM modules and nothing else; no brackets, cables or additional hardware are included.

Should I choose this dual-rank 2Rx8 kit or look for a single-rank alternative for my server?

This kit uses dual-rank 2Rx8 organisation; choose it if your server or workstation requires dual-rank ECC unbuffered DIMMs, otherwise select a single-rank kit that matches your platform's qualified vendor list.

Will the 1333 MHz rating run at that speed once installed in my system?

The modules are rated for 1333 MHz at CL9 and 1.35 V; actual operating speed is set by the server's memory controller and BIOS, so it will run at the highest common speed supported by the platform.

More in ECC Server RAM

Similar items