We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3L SODIMM sticks with gold contacts and black chips

A-Tech

A-Tech 8GB (2x4GB) DDR3L 1600 ECC SODIMM 204-Pin 1.35V 2Rx8

SKU CH-PM3T-XAKDP

Dual-channel 8 GB DDR3L ECC SODIMM kit runs at 1600 MHz with CL11 latency at 1.35 V for microservers and NAS

  • Total capacity8 GB (2 × 4 GB)
  • Rated speedDDR3L 1600 (PC3L 12800)
  • CAS latencyCL11
  • Rated voltage1.35 V
  • Buffer typeUnbuffered
  • Kit configurationDual Channel Kit

Capacity 8GB (2 x 4GB)

Speed DDR3L 1600 (PC3L 12800)

CAS Latency CL11

  • ECC protection prevents data corruption in critical workloads
  • Dual-rank 2Rx8 organisation increases memory density per slot
  • Low-voltage 1.35V operation reduces power draw and heat
  • DDR3L 1600 speed with CL11 latency speeds up responsive multitasking
  • 204-pin SO-DIMM form factor fits compatible laptops and microservers

8 GB DDR3L ECC SODIMM kit

This kit provides two 4 GB unbuffered ECC SODIMM modules for laptops, microservers and NAS units that accept DDR3L 1600 memory. Dual-rank organisation and error-correcting code help maintain data integrity in workloads that cannot tolerate silent corruption. The 1.35 V JEDEC low-voltage rating also allows operation at 1.5 V where the platform requires it.

204-pin dual-channel layout

The 204-pin SO-DIMM form factor fits standard DDR3 SODIMM slots without adapters or height clearance issues. A matched pair enables dual-channel bandwidth on compatible controllers, and the absence of a heat spreader keeps the modules thin enough for tight mobile workstation chassis. Installation follows normal SODIMM seating procedure with no special tools required.

Low-voltage DDR3L thermals

Running at 1.35 V reduces power draw and heat output compared with standard 1.5 V DDR3, helping small-form-factor systems stay within thermal limits during sustained loads. Unbuffered ECC adds minimal latency overhead while delivering single-bit error correction and multi-bit detection. The modules operate silently with no active cooling and draw only the power needed for the memory controller.

How it compares

Measured against everything we stock in Laptop RAM, at today’s prices. Recalculated every night.

Price $40.99
Cheaper than about 64% of the 2,079 comparable items (median $70.99).
Total capacity 8 GB (2 × 4 GB)
Lower than about 60% of the 1,886 comparable items (median 16 GB).
Price per GB $5.12 per GB
Cheaper than about 63% of the 1,886 comparable items (median $5.94 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameA-Tech
Product lineA-Tech DDR3 ECC SODIMM
Model nameA-Tech 4 GB 2Rx8 PC3L-12800 ECC SODIMM
Part numberNE-SS-0598
Total capacity8 GB (2 × 4 GB)
Product type204-Pin DDR3 SO-DIMM
Performance
Rated speedDDR3L 1600 (PC3L 12800)
Memory
CAS latencyCL11
ECC supportYes
Buffer typeUnbuffered
Kit configurationDual Channel Kit
Heat spreaderNo
Power
Rated voltage1.35 V
Compatibility
Recommended forAMD & Intel Compatible
More details
VariantECC SODIMM

Other versions of this model

5 more in the same range

Questions about this item

Does the DDR3L 1600 interface operate at PC3L-12800 speeds when installed in a system that only supports DDR3 1600?

Yes, the modules run at DDR3L 1600 (PC3L-12800) with CL11 latency at 1.35V; they are also rated to operate at 1.5V if the platform requires it.

What physical slot and pin count does this 204-pin SO-DIMM kit require?

Each 4GB module uses the standard 204-pin DDR3 SO-DIMM form factor, so the laptop or microserver must provide a 204-pin SO-DIMM socket.

How are the two modules installed for dual-channel operation, and what step is often missed?

Insert both modules into the matching-channel slots (usually same-coloured) until the side clips click; the common mistake is not pressing firmly enough to fully seat the contacts.

More in Laptop RAM

Similar items