A-Tech 4GB DDR4 2133 MHz ECC SODIMM PC4-17000 1Rx8 1.2V 260-Pin laptop RAM
- 4 GB
- 260-Pin DDR4 SO-DIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 8 GB dual-channel DDR4 ECC registered DIMM kit running at 2666 MHz with CL19 latency for servers and workstations
Capacity 8GB (2 x 4GB)
This 8GB kit contains two 4GB registered DIMMs built for DDR4 servers and workstations that require ECC memory. Each module runs at 2666 MHz with CL19 latency at 1.2V and uses a single-rank x8 organisation. The registered buffer reduces electrical load on the memory controller in multi-module configurations.
The registered design adds a buffer between the DRAM and the system bus, allowing larger memory populations without signal degradation. On-die ECC corrects single-bit errors and detects multi-bit errors to protect data integrity in critical workloads. Major-brand DRAM chips are used throughout and every module is tested before shipment.
Confirm that your server or workstation accepts DDR4 288-pin registered ECC DIMMs and does not require unbuffered or load-reduced modules. Check the system manual for approved memory speeds, maximum capacity per slot, and the correct slot population order for dual-channel operation. Desktop and laptop platforms cannot use these modules.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | A-Tech DDR4 Server Memory RAM |
| Model name | A-Tech 4 GB 1Rx8 PC4-2666 V-R |
| Part number | AT4G2D4D2666RS8N12 V |
| Total capacity | 8 GB (2 × 4 GB) |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL19 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx8 |
| Kit configuration | Dual Channel Kit |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
Other versions of this model
No firmware or battery-backed settings are required; the ECC function is handled by the memory controller once the modules are seated in the 288-pin slots.
The modules have no heat spreader, so the DRAM junction temperature reaches its rated maximum before any other component throttles.
At 1.20 V each 4 GB stick draws only a few watts, so the total thermal load stays low even in a dense 288-pin DIMM array.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?