Accupower AccuLoop-X NiMH Battery Combo 48xAAA 1100mAh 48xAA 2600mAh

Ready-to-use NiMH power pack

This combo delivers forty-eight AAA cells at 1100 mAh and forty-eight AA cells at 2600 mAh, all rated at 1.2 V. The nickel-metal-hydride chemistry avoids memory effect, so the batteries can be topped up without capacity loss. They arrive pre-charged and hold 85% of their energy after a year in storage. The mix suits households, workshops and field kits that need both form factors on hand.

Pre-charged convenience and cycle life

Because the cells ship already charged, devices can be powered immediately without a first charge cycle. The low self-discharge rate keeps spares ready for months, reducing the need to hunt for fresh packs. Each cell is rated for up to 1000 recharge cycles, which replaces hundreds of single-use alkaline batteries over its service life. This cuts ongoing cost and waste for high-drain gear such as flashlights, remotes and test instruments.

NiMH voltage and charger limits

The 1.2 V nominal output is lower than the 1.5 V of primary alkalines, so some voltage-sensitive equipment may show reduced runtime or fail to start. A charger designed for NiMH chemistry is required; using an incompatible charger can damage the cells or terminate charge early. The fixed capacities of 1100 mAh and 2600 mAh mean runtime is set per cell and cannot be expanded without adding more batteries.