We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex fibre cable with SC and ST connectors

AddOn

AddOn 11630148 2m SC male to ST male yellow duplex riser fibre optic cable

SKU CH-87R2-WBR73 MPN 11630148

A 2 m yellow duplex riser-rated single-mode fibre patch cable with SC and ST male connectors for indoor networking

  • Connector count1
  • Connector details1 x ST Male Network
  • Product typeNetwork Cable
  • Product colorYellow
  • Overall length6.56 ft (2 m)
  • OS2 single-mode for 1310 nm and 1550 nm wavelengths
  • Riser-rated OFNR jacket for indoor vertical runs
  • Duplex two-strand design supports simultaneous transmit and receive
  • SC male to ST male connectors for direct equipment linking
  • 2 m (6.56 ft) length fits standard rack spacing

2 m SC-to-ST single-mode patch cable

This 2 metre yellow duplex cable carries single-mode OS2 fibre terminated with SC male and ST male connectors. It is rated OFNR for riser installation in vertical building pathways. The 9/125 micron core supports 1310 nm and 1550 nm wavelengths for campus and data-centre links.

Passive fibre with no power or cooling needs

The cable draws no electricity, generates no heat and produces no audible noise. Its non-conductive glass construction eliminates ground-loop risk between connected equipment. Riser-rated jacketing meets fire-safety requirements for between-floor runs without additional conduit.

Duplex link for transceiver pairs

Each end presents one SC male and one ST male connector, matching transceivers that transmit and receive on separate strands. The 6.56 ft length suits rack-to-patch-panel or cross-connect distances in standard cabinets. ISO/IEC 11801 compliance ensures interoperability with compliant networking gear.

How it compares

Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.

Price $20.99
Cheaper than about 64% of the 812 comparable items (median $29.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameAddOn
Product typeNetwork Cable
Product colorYellow
Ports & slots
Connector count1
Connector details1 x ST Male Network
Size & build
Overall length6.56 ft (2 m)
Shipping weight0.91 kg
Package size203 × 178 × 51 mm

Questions about this item

How do I install the SC and ST connectors on the 11630148 patch cable?

Push each connector straight into its mating adapter until the latch clicks or the bayonet locks; the step people miss is cleaning both end-faces with a lint-free wipe and isopropyl alcohol before mating to avoid contaminating the 9/125 µm core.

What maintenance will the 2m yellow duplex riser cable need later?

Inspect end-faces with a fibre scope before every reconnect, clean with a one-click cleaner if contaminated, and replace the patch cord if insertion loss exceeds the 1 dB/km OS2 budget for the 6.56 ft run.

What limit appears first on the OS2 single-mode link under sustained use?

The 1 dB/km attenuation ceiling at 1310 nm or 1550 nm is the first physical limit; on a 6.56 ft span it translates to a fraction of a decibel, so connector cleanliness dominates real-world loss.

More in Fiber Optic Patch Cables

Similar items