We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex single-mode fibre patch cable with LC male connectors on both ends, ten metre length

AddOn

AddOn ADD-LC-LC-10M9SMF fibre optic cable 10m 9/125 OS2 duplex LC/LC yellow

SKU CH-DJP5-RHH0A MPN ADD-LC-LC-10M9SMF

A 10-metre yellow OS2 duplex patch cable with LC connectors on both ends, tested for insertion loss and built with a pull-proof LSZH jacket for single-mode gigabit links

  • Connector count1
  • Connector detailsConnector on First End:2 x LC Male Network Connector on Seco
  • Product typeCable Connectors
  • Product colorYellow
  • Overall length32.81 ft (10 m)
  • DetailsCable Mode: Duplex Length: 10m (32.81 ft) Media: SMF Color:
  • Single-mode 9/125 fibre carries gigabit ethernet over long distances
  • Duplex LC-to-LC connectors link transceivers in patch panels and switches
  • 00 m length suits rack-to-rack and cross-room runs
  • LSZH jacket resists fire and limits toxic smoke in building pathways
  • 100 % optically tested for insertion loss before shipment

Duplex LC single-mode patch cable

This yellow OS2 patch cable carries two single-mode fibres terminated with LC male connectors on both ends. It spans 10.00 metres (32.81 feet) and is built for gigabit Ethernet links that require low-loss transmission over distance. The LSZH jacket resists flame spread and limits smoke in indoor installations. Every unit is optically tested for insertion loss before it leaves the factory.

Replaces shorter or multi-mode jumpers

When an existing patch cord cannot reach between distribution frames or switches, this 10 metre length closes the gap without adding splices. It upgrades multi-mode runs where the link budget demands single-mode reach and OS2 performance. The MSA-compliant connectors mate with standard LC ports on transceivers and patch panels. Installers who need a longer single-mode duplex run will find the length and connector match convenient.

Sustained load behaviour

The pull-proof jacket and injection-moulded boots protect the 9/125 µm fibre from tension and impact during routing and long-term dress. Single-mode glass is immune to electromagnetic interference, so signal integrity holds steady in dense cable trays or near power equipment. LSZH materials maintain mechanical properties across temperature cycles typical of equipment rooms. The cable is designed for permanent installation rather than repeated re-patching.

How it compares

Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.

Price $17.99
Cheaper than about 70% of the 812 comparable items (median $29.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameAddOn
Model nameADD-LC-LC-10M9SMF
Product typeCable Connectors
Product colorYellow
Ports & slots
Connector count1
Connector detailsConnector on First End:2 x LC Male Network
Connector on Second End:2 x LC Male Network
Size & build
Overall length32.81 ft (10 m)
Shipping weight0.18 kg
Package size330 × 279 × 44 mm

Questions about this item

What duplex LC connector spacing does the 10.00 m yellow patch cable need in the patch panel?

The cable uses two LC male connectors on each end spaced for standard duplex LC panel cut-outs; allow room for the 100 % optically tested ferrules and the LSZH jacket bend radius when planning the patch panel layout.

Which cleaning step is often skipped before mating the LC male ends on this 32.81 ft OS2 jumper?

Technicians frequently forget to inspect and clean both 125 µm ferrules with a lint-free wipe and isopropyl alcohol before insertion, risking insertion loss on the single-mode link.

When should the LSZH-jacketed 9/125 µm single-mode duplex cable be replaced?

Replace the jumper if visual inspection shows jacket cracks, connector housing damage, or if insertion-loss testing exceeds the link budget for the gigabit Ethernet application.

More in Fiber Optic Patch Cables

Similar items