AirSept 76201 Line Splice Low Side Service "T" 1/2" OD 8-piece solar accessory kit
An eight-piece line-splice kit provides low-side service tees with couplers, nuts, sleeves and anti-vibration rings for 1/2-inch A/C, heater and transmission lines
- Product typeAccessories & Compressors
- Aluminium and rubber construction resists corrosion and vibration
- Low-side service T-fitting simplifies A/C line connections
- Eight-piece kit includes coupler, nuts, sleeves and anti-vibration rings
- Designed for automotive A/C, heater and transmission systems
- Compact 3-3/4 by 2-3/4 by 1-1/4 inch profile fits tight engine bays
Solar A/C Line Splice Kit
The AirSept 76201 kit provides eight aluminium and rubber components for splicing low-side service lines on automotive air-conditioning systems. It is intended for technicians who need a ready-to-use assortment of coupler bodies, nuts, sealing sleeves and anti-vibration tension rings for A/C, heater or transmission work.
1/2-Inch OD Service Port
The single specification that determines fit is the 1/2-inch outer-diameter service port on the included coupler body; only lines matching that dimension will seal correctly with the supplied nuts and sleeves.
Vibration-Resistant Seal Under Load
Under sustained engine vibration and pressure cycling the anti-vibration tension rings maintain clamp force on the sealing sleeves, preventing refrigerant loss where a standard nut would loosen over time.
How it compares
Measured against everything we stock in Solar-Powered Chargers & Devices, at today’s prices. Recalculated every night.
- Price $32.99
- Pricier than about 60% of the 874 comparable items (median $25.99).
Specifications
| Product | |
|---|---|
| Brand name | AIRSEPT |
| Product type | Accessories & Compressors |
Questions about this item
What does the 8-piece count mean for a single A/C line repair?
The kit supplies a coupler body with service port, nuts, sealing sleeves and anti-vibration tension rings so one splice can be completed without extra parts.
How does the low-side service "T" connect to the system?
It fits 1/2" OD tubing and uses the included nuts and sealing sleeves to form a secure, low-side access point.
What clearance is needed to install the splice body?
The body measures 3-3/4" high by 2-3/4" wide by 1-1/4" deep, so allow at least that space around the line.
More in Solar-Powered Chargers & Devices
Similar items
NORWILL YN3-3W-01 3W Solar Panel 5000mAh 6V USB-C DC 9.8ft IP65
- YN3-3 W-01
- 6 V
NORWILL 3W Solar Panel for Ring Camera 5000mAh IP65 9.8ft Cable
- 3 W Solar Panel for…
- For Ring Camera





