Ali Indistries Inc 4229 60G Garnet Sandpaper 9x11 25 sheets
Coarse 60-grit garnet sheets for rough-sanding bare wood, resin-coated for longer life, 25 sheets per box
- Product typeSanders
- Coarse 60-grit removes stock quickly on bare wood
- Resin coating resists wear longer than glue-bond paper
- Standard 9 x 11 inch sheets fit common hand blocks
- 25 sheets per box keep a workshop supplied
- Garnet abrasive suits fine woodworking and cabinet making
Garnet sandpaper for rough wood sanding
This pack contains 25 sheets of 9 x 11 inch garnet abrasive rated at 60 grit. It is intended for cabinet makers and woodworkers who need to remove stock quickly on bare timber. The resin coating resists premature grain shedding during heavy hand or block sanding.
60 grit coarse grade for aggressive stock removal
The coarse 60 grit designation is the single figure that determines whether this paper matches the task. It cuts fast on rough-sawn lumber and old finishes but leaves deep scratches that must be refined with finer grades before any coating is applied.
25 sheets give ample supply for a full project
A full box covers multiple large panels or a complete set of cabinet doors without running out. The coarse grit wears faster than finer papers, so the 25-sheet quantity provides practical headroom for extended rough-sanding sessions before a reorder is needed.
How it compares
Measured against everything we stock in Sanders, Rotary & Demolition Tools, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 68% of the 477 comparable items (median $21.99).
Specifications
| Product | |
|---|---|
| Brand name | Ali Industries |
| Model name | 4229 |
| Product type | Sanders |
Questions about this item
How does 60 grit perform on bare wood in a real project?
The 60 grit garnet sheets remove material quickly for rough sanding on bare wood, making them suited for initial levelling before finer grits.
What backing or attachment does this garnet paper use on a hand sander?
These are plain 9 by 11 inch sheets without hooks or adhesive, so they clamp onto a hand block or wrap a sanding pole.
Will the 9 by 11 inch sheets fit my half-sheet orbital sander?
The sheets measure 9 by 11 inches; they must be cut to match a half-sheet orbital pad, which typically takes 5.5 by 9 inches.
More in Sanders, Rotary & Demolition Tools
Similar items
Westward 2AJJ8 Handguarded Brick Chisel 3 in 7-1/2 in
- Wood Carving Tools
- Chrome Vanadium Ste…
Ali Industries Inc 4210 80 Grit Aluminum Oxide Sandpaper 9x11 25 Sheets
- Sanders
Mayhew 12311 Floor Chisel 11 In Power
- Wood Carving Tools
- Heat Treated Alloy…





