We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10-inch car subwoofer with stamped steel basket, pulp paper cone and EPDM surround

ALPHASONIK

ALPHASONIK NSW410 10" car subwoofer 400 W RMS 4 Ohm

SKU CH-664J-DJCP2

A 10-inch car subwoofer with dual voice coils, 400 W RMS power handling and a 35-500 Hz frequency response

  • Subwoofer size10 in (25.4 cm)
  • Voice coilDual
  • Peak wattage1200 W
  • RMS power rating400 W
  • Rated impedance4 Ohm
  • Product typeSubwoofers
  • Heavy-gauge stamped steel basket resists flex under high output
  • Laminated pulp-fibreglass cone with EPDM surround maintains control in extreme temperatures
  • Dual 4-ohm voice coils allow flexible wiring for 2-ohm or 8-ohm loads
  • 400 W RMS and 1200 W peak deliver deep, authoritative bass
  • 85 dB sensitivity and 35–500 Hz response reproduce low notes efficiently

NSW410 10″ car subwoofer

The ALPHASONIK NSW410 is a 10-inch car subwoofer built for drivers who want deeper bass without a massive enclosure. Its dual voice-coil design and 4 Ohm impedance suit single-sub installations in sedans, hatchbacks or compact SUVs where space is tight. Buyers who need more storage or a second subwoofer for SPL competition will find the single-unit format limiting.

Sustained 400 W RMS output

Rated at 400 watts RMS and 1200 watts peak, the NSW410 maintains consistent output during extended listening sessions rather than only short bursts. The 55 oz magnet and laminated non-pressed pulp cone with fiberglass keep distortion low when driven continuously. Sensitivity of 85 dB at 1 W/1 m means moderate amplifier power delivers usable volume.

Straightforward enclosure mounting

Mounting depth is 128 mm with a 233 mm cut-out and 270 mm overall diameter, so the woofer drops into standard sealed or ported boxes. Eight-gauge nickel-plated terminals accept heavy speaker wire without adapters. The stamped-steel Alpha basket and EPDM surround tolerate temperature swings, but installers must verify their enclosure volume matches the 35–500 Hz response range for best results.

How it compares

Measured against everything we stock in Car Subwoofers & Enclosures, at today’s prices. Recalculated every night.

Price $100.99
Cheaper than about 73% of the 268 comparable items (median $185.49).

Specifications

Product
Brand nameAlphasonik
Product typeSubwoofers
Product colorBlack
Audio & video
RMS power rating400 W
Rated impedance4 Ohm
Power
Peak wattage1200 W
Size & build
Subwoofer size10 in (25.4 cm)
More details
Voice coilDual

Questions about this item

How much heat and power does the 400 W RMS subwoofer generate during long listening sessions?

The NSW410 is rated at 400 W RMS with 85 dB @ 1w/1m sensitivity and a 55 oz magnet; it draws the current needed for that output and its EPDM surround is designed for extreme temperatures, so heat stays controlled under continuous use.

What amplifier and wiring must I already own to run this 4 Ohm dual voice-coil subwoofer?

You need a mono or bridged amp stable at 4 Ω (or 2 Ω / 8 Ω depending on how the dual coils are wired) that can deliver around 400 W RMS, plus 8-gauge or thicker power and ground cables and the 8-gauge nickel-plated terminals on the sub accept standard ring terminals.

Will this 10-inch NSW410 fit the same cut-out and depth as my old 10-inch subwoofer?

The mounting depth is 128 mm (5.04 in) and the cut-out diameter is 233 mm (9.17 in) with an overall diameter of 270 mm (10.63 in); compare those figures to your existing enclosure to confirm fit.

More in Car Subwoofers & Enclosures

Similar items