We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black mid-tower ATX case with brushed front panel and dual side mesh intake, four 120mm PWM fans visible

Antec

Antec P7 S Mid-Tower ATX PC Case

SKU CH-R8GX-WRKQM MPN P7 S

Mid-tower ATX case with four pre-installed PWM fans, dual side mesh intake, 360 mm top radiator support, sound-dampening side panels and 405 mm GPU clearance

  • Max graphics card length405 mm
  • Housing materialSteel / Plastic
  • Supported motherboard sizesATX / ITX / Micro ATX
  • Side panel typeSteel Side Panel + Sound Dampening Foam
  • Dust filteringBottom / Top
  • 3.5-inch internal bays2

Model P7 S

  • Dual side mesh panels boost intake airflow for cooler components
  • Four pre-installed 120 mm PWM fans with daisy-chain control ready to use
  • Top mount supports 360 mm radiator for high-performance liquid cooling
  • Sound-dampening foam on both side panels cuts system noise
  • GPU clearance of 405 mm fits long graphics cards including RTX 50 Series

Build-Ready Mid-Tower

The Antec P7 S is a black ATX mid-tower built from steel and plastic. It accepts ATX, Micro-ATX and ITX motherboards and includes four 120 mm PWM fans pre-wired in a daisy-chain for simple speed control. Two 3.5-inch and one 2.5-inch internal drive bays provide storage flexibility for mainstream builders.

Straightforward Assembly

Seven expansion slots and a 405 mm maximum graphics-card length leave ample room for large GPUs. A 175 mm CPU-cooler height limit and 270 mm power-supply depth allowance cover most air coolers and standard ATX units. Four rubber cable grommets and three Velcro straps keep wiring tidy, while removable top and bottom dust filters simplify cleaning.

Cooling & I/O Limits

The top panel supports radiators up to 360 mm and fans up to 240 mm, while the front takes up to 240 mm and the rear a single 120 mm unit. A bottom intake with roughly 30 mm clearance enables reverse-mounted fans to blow directly on the graphics card. The front I/O includes a USB 3.2 Gen 2 Type-C port for fast external storage.

How it compares

Measured against everything we stock in Tower & Desktop PC Cases, at today’s prices. Recalculated every night.

Price $59.99
Cheaper than about 81% of the 1,468 comparable items (median $100.99).
Max graphics card length 405 mm
Higher than about 55% of the 894 comparable items (median 400 mm).

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameAntec
Model nameP7 S
Product typeATX Mid Tower
Product colorBlack
Storage
3.5-inch internal bays2
2.5-inch internal bays1
Ports & slots
Expansion card slots7
Size & build
Max graphics card length405 mm
Housing materialSteel / Plastic
Side panel typeSteel Side Panel + Sound Dampening Foam
Dust filteringBottom / Top
Fan mounting optionsIncluded Fan(s): 3 × 120 mm PWM fans at the front + 1 × 120 mm PWM fan at the rear
Product dimensions18.82 × 8.74 × 18.31 in
Product weight5.75kg
Shipping weight7.17 kg
Package size552 × 552 × 292 mm
Compatibility
Supported motherboard sizesATX / ITX / Micro ATX
Radiator supportFront - Up to 120 mm / Front - Up to 140 mm / Front - Up to 240 mm / Rear - Up to 120 mm / Top - Up to 120 mm / Top - Up to 240 mm / Top - Up to 360 mm
CPU cooler height limit175 mm
PSU length limit270 mm

Other versions of this model

5 more in the same range

Questions about this item

How do I confirm the 4 pre-installed 120mm PWM fans are running after I build in the P7 S?

Connect the daisy-chain cable to a motherboard PWM header, then check fan speeds in BIOS or monitoring software; all four fans should report RPM under load.

What comes in the box and what must I buy separately for the Antec P7 S?

The case includes 4 PWM fans, 4 rubber grommets, 3 Velcro straps, removable top filters and dust filters for bottom and top; you must purchase motherboard, PSU, CPU cooler, GPU, drives and any extra fans or radiators separately.

Which top radiator size should I choose for the P7 S — 120mm, 240mm or 360mm?

The top supports up to 360mm; pick 360mm for maximum liquid-cooling capacity, 240mm for a balance of performance and clearance, or 120mm if space above the motherboard is limited.

More in Tower & Desktop PC Cases

Similar items