Anvil 0310019005 Malleable Iron 90° Reducing Street Elbow Class 150 3/4 x 1/2 FNPT x MNPT
Malleable iron 90° reducing street elbow connects 3/4 in FNPT to 1/2 in MNPT for Class 150 drain systems rated to 300 psi at 150°F and 150 psi saturated steam at 350°F
- Product typeDrain Components
- Reduces pipe size from 3/4 in to 1/2 in for compact installations
- Malleable iron construction withstands 300 psi at 150 °F for reliable service
- 90° street elbow connects FNPT to MNPT without extra fittings
- Class 150 rating supports 150 psi saturated steam at 350 °F
- Meets ASME B16.3 and UL/FM standards for code compliance
Plumbing fitting for drain systems
The Anvil 0310019005 is a malleable iron reducing street elbow designed for drain components. It connects a 3/4 in female NPT thread to a 1/2 in male NPT thread at a 90 degree angle. The fitting meets ASME B 16.3 standards and carries UL and FM approvals for use in plumbing installations.
Class 150 iron construction
Malleable iron provides structural rigidity for the Class 150 rating. The FNPT x MNPT connection allows direct joining of different pipe sizes without a separate coupling. Threaded ends enable installation with standard pipe wrenches and thread sealant in drain and trap assemblies.
Rated for 300 psi at 150 Degrees F
The fitting withstands a maximum pressure of 300 psi at 150 Degrees F and saturated steam pressure of 150 psi at 350 Degrees F. Operating temperature range spans from -20 Degrees to 350 Degrees F. No moving parts or power requirements mean silent operation with no energy draw.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 82% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Anvil |
| Model name | 0310019005 |
| Product type | Drain Components |
Questions about this item
What does the Class 150 and ASME B 16.3 rating mean for pressure limits?
The fitting handles 300 psi at 150 °F and 150 psi saturated steam at 350 °F per ASME B 16.3.
What pipe threads are needed to install this elbow?
One end takes 3/4 in FNPT, the other 1/2 in MNPT; match those thread sizes exactly.
How do you seal the threads without cracking the malleable iron?
Apply PTFE tape or pipe dope on male threads only, hand-tighten, then turn one to two full turns with a wrench — no more.
More in Drain Stoppers, Strainers & Traps
Similar items
Nibco, Inc.
Nibco, Inc. 7073LF-34 90° Elbow Trap 3/4 in C x FNPT Bronze
- Drain Components
- HAWA
$10.99
0.00013316BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00016951BTC
In stock