We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron reducing tee with three FNPT ports, silver finish

Anvil

Anvil 0310051206 2" x 1" x 2" Malleable Iron Reducing Tee trap

SKU CH-E62A-T2835 MPN 0310051206

Malleable iron reducing tee with 2" x 1" x 2" FNPT connections, rated 300 psi at 150°F and 150 psi saturated steam at 350°F, meeting ASME B16.3 and UL/FM standards

  • Product typeDrain Components
  • Product colorSilver
  • Malleable iron construction withstands 300 psi at 150 °F
  • Reducing tee connects 2 in, 1 in and 2 in FNPT ports
  • Class 150 rating meets ASME B16.3 and UL/FM standards
  • Operates from −20 °F to 350 °F for steam and water systems
  • Silver finish resists corrosion in drainage and trap installations

Malleable Iron Reducing Tee

This Anvil reducing tee connects three pipe sections at a junction where the branch line is smaller than the run. The fitting is cast from malleable iron with a silver finish and carries a Class 150 pressure rating. It is intended for plumbing and piping systems that require a durable, threaded connection.

Installers needing FNPT threads and Class 150 rating

The fitting uses female National Pipe Thread (FNPT) connections on all three ports and meets ASME B16.3 dimensions. It is not suited for systems that require socket-weld, butt-weld or flanged ends. Buyers who need a straight coupling or a tee with equal branch size should select a different fitting.

Pressure and temperature limits

The tee is rated for a maximum working pressure of 300 psi at 150 degrees F and a saturated steam pressure of 150 psi at 350 degrees F. Its operating temperature range extends from -20 degrees to 350 degrees F. These limits determine whether the fitting matches the design conditions of the intended piping system.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $34.99
Typical for this category: the median of 4,240 items is $31.99.

Specifications

Product
Brand nameAnvil
Model name0310051206
Product typeDrain Components
Product colorSilver

Questions about this item

How do I install the 2" x 1" x 2" malleable iron reducing tee with FNPT connections and what step is commonly missed?

Apply thread sealant or PTFE tape to the FNPT threads, hand-tighten, then use a pipe wrench for 1.5 to 2 additional turns. The step often missed is checking alignment before final tightening to avoid stress on the Class 150 fitting.

What maintenance or replacement will the malleable iron reducing tee need over time?

Inspect the FNPT joints periodically for leaks or corrosion. Replace the tee if threads are damaged, if the body shows cracks, or if system pressure regularly approaches the 300 psi rating at 150 Degrees F.

What limit appears first when the reducing tee runs continuously at high temperature?

The saturated steam pressure limit of 150 psi at 350 Degrees F is reached before the 300 psi water rating, making it the governing constraint for sustained steam service.

More in Drain Stoppers, Strainers & Traps

Similar items