We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron reducing tee, black finish, threaded ends

Anvil

Anvil 0310051404 Reducing Tee 2 in x 3/4 in x 2 in Class 150 Malleable Iron

SKU CH-E6Z0-6PWWC MPN 0310051404

Connects three pipes at different diameters with a Class 150 malleable iron reducing tee rated for 300 psi at 150°F and 150 psi saturated steam at 350°F

  • Product typeDrain Components
  • Malleable iron construction handles 300 psi at 150°F
  • Class 150 rating supports 150 psi saturated steam at 350°F
  • ASME B16.3 compliance ensures reliable pipe connections
  • FNPT threads allow direct installation without extra adapters
  • Reducing tee connects 2 in and 3/4 in pipe sizes

Fitting for branch connections

This Anvil reducing tee joins a 3/4 in branch to a 2 in main line using FNPT threads. The malleable iron body meets Class 150 specifications for standard plumbing and drainage installations. It suits installers who need a durable, code-compliant branch fitting.

Pressure and temperature limits

The fitting carries a maximum pressure rating of 300 psi at 150 degrees F and a saturated steam rating of 150 psi at 350 degrees F. Its operating range spans -20 to 350 degrees F, so it handles sustained hot-water or low-pressure steam service without degradation. The ASME B 16.3 listing and UL/FM approvals confirm long-term structural integrity.

Threaded installation notes

FNPT threads require sealant or tape and careful alignment to prevent leaks; over-tightening can crack the iron casting. The reducing outlet demands a matching 3/4 in male adapter, so verify the mating component before assembly. Buyers needing a straight coupling or a larger branch size will need a different fitting.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $30.99
Typical for this category: the median of 4,240 items is $31.99.

Specifications

Product
Brand nameAnvil
Model name0310051404
Product typeDrain Components

Questions about this item

How much pressure can the 2 in x 3/4 in x 2 in reducing tee handle during continuous steam service?

The malleable iron fitting is rated for saturated steam pressure up to 150 psi at 350 degrees Fahrenheit, suitable for sustained high-temperature lines.

What piping connection type is required to install this Anvil 0310051404 tee?

It uses FNPT female National Pipe Thread on all three ports, so the installer needs matching male-threaded pipe or nipples in 2 inch and 3/4 inch sizes.

Will the Class 150 malleable iron tee remain compatible with existing ASME B16.3 piping in a retrofit?

Yes, the tee meets ASME B16.3 dimensional standards, so it threads directly onto legacy Class 150 iron pipe without adapters.

More in Drain Stoppers, Strainers & Traps

Similar items