We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized malleable iron reducing tee with three female NPT ports

Anvil

Anvil 1105R Galvanized Malleable Iron Reducing Tee 2 in x 2 in x 3/4 in

SKU CH-PWPB-GPXG1

Galvanized malleable iron reducing tee connects two 2 in female NPT ports to a 3/4 in female NPT branch for Schedule 40 pipe at Class 150 with a 300 psi maximum operating pressure at 150 Degrees F

  • Galvanized malleable iron resists corrosion in plumbing systems
  • Class 150 rating suits Schedule 40 pipe installations
  • 300 psi maximum pressure handles demanding water lines
  • NPT female threads connect 2 in and 3/4 in pipes

Anvil 1105R Galvanized Reducing Tee

The Anvil 1105R is a galvanized malleable iron reducing tee designed for plumbing systems using Schedule 40 pipe. It connects two 2-inch female NPT ports with a 3/4-inch female NPT branch. Rated Class 150, it suits residential and commercial water, air or gas lines where a secure threaded junction is required.

Thermals noise and power draw

As a passive metal fitting the tee generates no heat, produces no noise and draws no power during operation. Its galvanized coating resists corrosion at the rated 300 psi and 150 degrees F maximum. Installers should verify thread compatibility and system pressure limits before assembly.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $37.99
Pricier than about 75% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameAnvil

Questions about this item

How do I install the 2 in NPT female ends of the Anvil 1105R reducing tee, and what step is commonly missed?

Apply PTFE tape or pipe dope to the male threads, hand-tighten, then turn one to two full turns with a wrench; the step often missed is cleaning both threads thoroughly before sealing.

What maintenance or replacement will the galvanized malleable iron tee need after years in a Schedule 40 system?

Inspect for white rust or scaling at the 3/4 in branch; if corrosion appears, replace the tee because the galvanized coating cannot be restored in place.

More in Hose Fittings, Adapters & Clamps

Similar items