Aomoproing 3 Pack USB 3.0 Male to Male Cable 10ft 1.64 ft
Three USB 3.0 Type-A male-to-male cables extend peripherals up to 10 ft with 5 Gbps transfer
Cable Length 10 Feet
- 1.64 Feet$8.99
- 3.3 Feet$9.99
- 6.6 Feet$9.99
- 10 Feet$12.99
- USB 3.0 Male-to-Male connects peripherals to a computer for fast file transfer
- Up to 5 Gbps SuperSpeed data transfer, ten times faster than USB 2.0
- Backwards compatible with USB 2.0 and USB 1.1 ports for legacy device support
- Plug-and-play operation with no driver required for hard drives, printers and cameras
- Three cables at 1.64 ft each suited for short-range connections like WD My Cloud drives
Three-Cable Pack for USB 3.0 Peripherals
This pack supplies three USB 3.0 Type A male-to-male cables for connecting peripherals such as hard-drive enclosures, printers, modems or cameras to a computer. Each cable acts as a bi-directional extension for an existing USB 3.0 link. No driver installation is required; the connection works immediately on plug-in.
Short 1.64 ft Length Suits Tight Setups
At 1.64 ft each, the cords are intended for desktop or rack positions where a long run would create clutter. The male-to-male layout bridges a peripheral’s Type A port directly to the host port without an intermediate coupler. Backwards compatibility with USB 2.0 and USB 1.1 ports lets the same cables serve older hardware.
5 Gbps Ceiling and No PC-to-PC Link
The USB 3.0 interface caps throughput at 5 Gbps, so very fast SSDs will not reach their peak sequential speeds through these cords. The cables do not support direct computer-to-computer data transfer. Buyers needing longer reach or a host-to-host link should look for a different cable type.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 70% of the 15,227 comparable items (median $14.99).
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Questions about this item
What data rate does the USB 3.0 Type-A male-to-male cable support in practice?
The cable carries up to 5 Gbps SuperSpeed transfer, and falls back to USB 2.0 or 1.1 speeds when plugged into legacy ports.
What physical space does the 1.64 ft cable need to fit between devices?
Each cable is 1.64 ft long, so allow roughly that distance plus connector clearance between the two Type-A ports.
How is the bi-directional cable installed and what common mistake should be avoided?
Plug each Type-A male end into the host and peripheral; do not try to link two computers directly as this cable does not support that.
More in USB Cords & Extension Cables
Similar items
ESTONE PQ001 USB4 Gen 3x2 cable 3.3ft 40Gbps 240W Copper
- USB C to USB C
- USB4
STARTECH UUSBHAUB3RA USB 2.0 A to Right Angle Micro B Cable 3 ft 91 cm
- USB A to Micro USB
- USB 2.0
ESTONE TJ-A323 USB4 cable 1.6ft 40Gbps 100W 8K@60Hz
- USB C to USB C
- USB4
STARTECH USB3SEXT6BK usb cable
- Connector on First…
- Data Transfer Cable
Jansicotek 240W USB4 cable 1.6Ft 40Gbps 8K@60Hz
- USB C to USB C
- USB4










