Aomoproing 8K DP 2.1 cable 6.6 ft
DisplayPort 2.1 cable delivers 40 Gbps bandwidth for 8K at 60 Hz or 4K at 120 Hz and is 6.6 feet long
- 8K at 60 Hz for ultra-sharp visuals
- 4K at 120 Hz enables smooth high-refresh gaming
- 40 Gbps bandwidth carries uncompressed HDR and audio
- Pure copper conductors ensure reliable signal over 6.6 ft
- Backwards compatible with DP 1.4, 1.3, 1.2, 1.1
8K DisplayPort 2.1 cable for high-refresh monitors
This 6.6 ft DisplayPort 2.1 cable delivers 40 Gbps bandwidth using HBR10. It supports 8K at 60 Hz, 4K at 120 Hz or 144 Hz and 2K at up to 240 Hz. The pure copper construction ensures reliable signal integrity for demanding graphics cards and monitors.
Replaces older DisplayPort cables limiting bandwidth
Upgrade from any cable rated for DisplayPort 1.4 or earlier when your monitor and GPU support 8K or high refresh rates at 4K. The jump is worth it if you own a 49-inch Odyssey G9 or similar display that requires HBR10 and DSC 1.2a for full resolution and refresh performance.
Fits between GPU and monitor with backward
The cable connects directly from a DisplayPort source to a DisplayPort sink using standard DP connectors. It works with DP, DP++ and DisplayPort++ ports and remains compatible with DisplayPort 2.0, 1.4, 1.3, 1.2, 1.2a and 1.1 devices. No external power or adapters are required for operation.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $20.99
- Pricier than about 64% of the 3,804 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Aomoproing DisplayPort 2.1 cable 6.6ft 8K 60Hz 4K 144Hz 40Gbps VESA Certified
Questions about this item
Will the 6.6 ft length reach my monitor if the PC is on the floor?
The cable is 6.6 ft long, which typically covers a floor-standing tower to a desk-mounted display with slack for routing.
Do I need to lock the connector in place or just push it in?
Push each DisplayPort plug straight in until the latch clicks; the common mistake is angling the connector, which bends pins and prevents a secure lock.
How often should I replace this cable to keep 8K 60 Hz performance?
Replace only if the latch breaks, pins bend, or you see signal drop-outs; the pure-copper construction and HBR10 rating do not degrade with age under normal use.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
Belkin F2CD004B DisplayPort to HDMI Adapter Cable 20 pin to 19 pin
- DisplayPort to HDMI
- Black
STARTECH DP2HDMM1MB DisplayPort to HDMI cable 3 ft 4K
- 3 ft (0.91 m)
- DisplayPort to HDMI
STARTECH DP14MM2M DisplayPort 1.4 cable 6.6 ft
- 6.6 ft (2.01 m)
- DisplayPort Cable
Nippon Labs DP-HDMI-6 6 ft displayport cable DP 1.2 to HDMI 4K 30Hz
- 6 ft (1.83 m)
- DisplayPort to HDMI
Belkin F2CD000B03-E 3 ft DisplayPort Cable
- 3 ft (0.91 m)
- DisplayPort Cable










