Aomoproing DisplayPort 1.4 cable 10 ft 8K 60 Hz 4K 144 Hz HDR
A 10 ft DisplayPort 1.4 cable delivers 8K at 60 Hz, 4K at 144 Hz and HDR with 32.4 Gbps bandwidth, gold-plated connectors and nylon braiding
- Drives 8K at 60 Hz with 32.4 Gbps HBR3 bandwidth
- Handles 4K 144 Hz and 2K 240 Hz for smooth gaming
- Gold-plated connectors and nylon braid resist wear and heat
- Supports FreeSync and G-SYNC variable refresh for tear-free play
- Carries HDR, DSC 1.2 and 32 audio channels over 10 ft
What this cable is and who needs it
This DisplayPort 1.4 cable links a graphics card or laptop to a monitor over 10 ft. It handles 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz with HDR, HDCP 2.2 and DSC 1.2. The 32.4 Gbit/s HBR3 bandwidth suits high-refresh gaming panels and future 8K displays. Buyers who need longer runs or fibre-optic extension should look elsewhere.
Installation and common pitfalls
Plug the gold-plated connectors into matching DisplayPort sockets; the nylon braid resists kinking during routing. Ensure the source and display both run DisplayPort 1.4 firmware to unlock 8K 60 Hz or 4K 144 Hz modes. A frequent issue is leaving DSC disabled in the driver, which caps the link at lower refresh rates. Secure the latches to prevent signal drop-outs from vibration.
The spec that decides fit
The single deciding figure is the 32.4 Gbit/s HBR3 rating. If your monitor and GPU combine for a higher uncompressed data rate — such as 4K 240 Hz without DSC — this cable cannot carry the stream. Match the required bandwidth to 32.4 Gbit/s or enable DSC 1.2 in the driver to stay within the limit.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $18.99
- Pricier than about 60% of the 3,804 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Aomoproing Mini DP to DP 1.4 Cable 10ft 8K@60Hz 4K@144Hz 2K@240Hz 32.4Gbps HDR G-Sync Thunderbolt 2 Compatible
Aomoproing USB C to USB C Cable 100W PD 5A Right Angle 90 Degree Nylon Braided 10ft 2-pack Black
- Black
Questions about this item
How do I verify the cable is delivering 8K at 60 Hz after connecting it?
Check your GPU control panel or monitor OSD to confirm the active link shows 7680 x 4320 at 60 Hz with HDR enabled and HDCP 2.2 active.
What comes in the box and do I need any extra adapters?
The box contains the 10 ft DisplayPort 1.4 cable with 24K gold-plated connectors and nylon braiding; no separate adapters are required for standard DisplayPort ports.
Which resolution and refresh rate combination should I select for my RTX 3080 setup?
Choose 4K at 144 Hz or 2K at 240 Hz to match the card's output and the cable's 32.4 Gbps HBR3 bandwidth limit.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
ESTONE TJ-A033 DisplayPort 1.4 cable 16.4 ft 8K 60Hz 4K 144Hz 32.4 Gbps black
- 16.4 ft (5 m)
- DisplayPort Cable
STARTECH DP2HDMM1MB DisplayPort to HDMI cable 3 ft 4K
- 3 ft (0.91 m)
- DisplayPort to HDMI
LUOM BK-CD2 USB-C to DisplayPort 1.4 cable 10 ft 32.4 Gbps 8K 60 Hz 4K 144 Hz
- 10 ft (3.05 m)
- DisplayPort Cable
Nippon Labs DP-HDMI-6 6 ft displayport cable DP 1.2 to HDMI 4K 30Hz
- 6 ft (1.83 m)
- DisplayPort to HDMI
Jansicotek BK-CD2 USB-C to DisplayPort 1.4 cable 10 ft 8K@60Hz 4K@144Hz
- 10 ft (3.05 m)
- DisplayPort Cable










