Aomoproing USB 3.0 Active Extension Cable 100 ft
Active USB 3.0 extension cable reaches 100 ft with a built-in signal booster chip for 5 Gbps data transfer without attenuation
Cable Length 100 Feet
- 16 Feet$32.99
- 33 Feet$38.99
- 50 Feet$48.99
- 65 Feet$55.99
- 100 Feet$76.99
- 5 Gbps transfer speed moves large files quickly
- 100 ft active extension reaches distant devices without signal loss
- Built-in signal booster chip prevents attenuation over long runs
- Multi-layer shielding reduces interference for stable data flow
- Plug-and-play compatibility with printers, cameras, consoles and drives
100 ft active USB 3.0 extender
This 100 ft active extension cable carries USB 3.0 signals from a Type-A host to a Type-A device without signal loss. A built-in booster chip maintains reliable data transfer across the full length. It targets users who need to place printers, webcams, VR gear, external drives or game consoles far from the computer.
Replaces passive cables beyond 3 m
Passive USB 3.0 cables typically fail past three metres because the 5 Gbit/s signal attenuates. This active cord solves that limit, so the upgrade is worth it whenever the device must sit 100 ft away. It is not for buyers who only need a short desktop link or who require bus power for high-draw peripherals.
Limited by USB 3.0 5 Gbit/s ceiling
The link tops out at 5 Gbit/s, roughly ten times the 480 Mbit/s of USB 2.0. Multi-layer shielding cuts interference, but the cable cannot exceed the USB 3.0 bandwidth ceiling. It also does not add power delivery beyond what the host port supplies.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $76.99
- Pricier than about 90% of the 15,227 comparable items (median $14.99).
Specifications
No published specifications for this item yet.
Other versions of this model
4 more in the same range
Aomoproing USB 3.0 Active Extension Cable 50ft Type-A Male to Female
Questions about this item
Does the 100 ft active cable need external power to work?
No, the built-in signal booster chip draws power from the host USB port so the cable operates without a separate adapter.
What is the correct way to connect the male and female ends for reliable 5 Gbps throughput?
Plug the Type-A male end into the computer or hub first, then attach the peripheral to the female end; reversing the order can prevent the booster chip from initialising.
How should the cable be stored to avoid damaging the internal booster chip?
Coil the cable loosely without sharp bends and keep it in a dry indoor location; the active electronics are sensitive to crushing and moisture.
More in USB Cords & Extension Cables
Similar items
Cables To Go 29341 USB 1.1 extender kit over Cat5 150 ft
- USB A to USB A
- USB
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE U310 USB 3.0 Active Extension Cable 100ft
- USB A to USB A
- Male to Female
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable









