We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze gate valve with wheel handle and press connection

Apollo

Apollo 30LF03501PR 1 in Gate Valve Bronze 200 psi

SKU CH-TMM7-9FW9S MPN 30LF03501PR

One-inch bronze gate valve rated for 200 psi water and steam with a 72.3 Cv flow coefficient and EPDM seals

  • Product typeDrain Components
  • Low-lead bronze body meets Prop 65 compliance
  • 200 psi rating handles high-pressure water systems
  • 3 Cv coefficient ensures strong flow capacity
  • Non-rising stem design saves installation space
  • Press connection enables quick, solder-free setup

Apollo 1 in Bronze Gate Valve

The Apollo 30LF03501PR is a 1 in bronze gate valve designed for water supply lines in residential and commercial plumbing systems. Its low-lead bronze construction meets modern drinking-water standards. Installers use it where a full-port shut-off is required without restricting flow.

Press Connection and Pressure Limits

The valve uses a press connection on the female end, so installation requires a compatible press tool and jaws matched to the tubing system. Operating pressure is rated at 200 psi for both water and steam service. The solid bronze wedge and EPDM seals are built to hold that pressure without leaking.

Installation Notes and Common Issues

A press tool is essential; without it the joint cannot be made and the valve will not seal. Over-pressing or using mismatched jaws can damage the fitting and cause leaks. The non-rising stem means the handle stays at a fixed height, which helps in tight spaces but gives no visual indication of gate position. California Proposition 65 warnings apply due to chemical content.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $97.99
Pricier than about 76% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameApollo
Model name30LF03501PR
Product typeDrain Components

Questions about this item

Should I choose the 1 in size for my water line?

The 1 in nominal valve size matches standard residential supply lines; the 72.3 Cv rating means it will pass plenty of flow without excessive pressure drop.

What does the 200 psi rating mean once the valve is installed?

The valve is tested to hold 200 psi for both water and steam service, so it will handle normal municipal pressure and boiler loops without leaking.

How does the press connection work and what limits it?

The female press end requires a compatible press tool and jaw; it creates a permanent, leak-free joint on copper or stainless tube and cannot be disassembled once pressed.

More in Drain Stoppers, Strainers & Traps

Similar items