ASRock SL-1000G 1000W ATX3.1 PCIe5.1 Full Modular Power Supply
- 1000 W
- 135 mm Striped Axia…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Delivers 1200 W through an ATX 3.1 fully modular design with dual 12V-2x6 connectors, 80 PLUS Platinum and Cybenetics Platinum efficiency, plus a 135 mm FDB fan that stops under light load
Model PLATINUM 1200W
The ASRock SL-1200P delivers 1200 W of continuous power through a fully modular ATX 3.1 design. It carries 80 PLUS Platinum and Cybenetics Platinum efficiency ratings plus Lambda A acoustic certification. The unit targets builders of high-end workstations or multi-GPU systems that need reliable, low-noise delivery.
Replacing a supply below 1000 W or one lacking native 12V-2x6 connectors removes the need for adapter cables and enables full PCIe 5.1 graphics support. The efficiency jump from Gold to Platinum reduces waste heat, and the semi-passive iCool mode cuts fan noise at typical desktop loads. The change is worthwhile when the new GPU or CPU pushes sustained draw past the old unit’s comfort zone.
The chassis measures 150 mm deep, so confirm the case allows at least that length plus cable bend radius. Ensure the motherboard has both a 24-pin and an 8-pin or 4+4-pin EPS socket for the included cables. The AC inlet accepts 100 to 240 V at 50 or 60 Hz, matching most mains supplies worldwide.
Measured against everything we stock in ATX Desktop Power Supplies, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ASRock |
| Model name | SL-1200P |
| Product color | Black |
| Product type | ATX 3.1 |
| Power | |
| Max wattage | 1200 W |
| Efficiency certification | 80 PLUS PLATINUM Certified |
| Built-in protection | OCP, SCP, OVP, UVP, OTP, OPP |
| Supply voltage | 100–240 V |
| AC input frequency | 50/60 Hz |
| Size & build | |
| Product dimensions | 150 mm × 150 mm × 86 mm |
| Shipping weight | 3.61 kg |
| Package size | 302 × 196 × 132 mm |
| More details | |
| Fan configuration | 135 mm Striped Axial FDB Fan |
Other versions of this model
The unit follows the ATX 3.1 form factor at 150mm wide, 150mm deep and 86mm high, so it fits any case built for a standard ATX supply.
Plug each native 12V-2x6 cable fully into the GPU until the green indicator on the connector is hidden; the frequent error is leaving a gap that triggers the NTC over-temperature sensor.
The fluid-dynamic-bearing fan is rated for long life; clean dust from the blades and grille once a year with compressed air and replace only if bearing noise appears.
More in ATX Desktop Power Supplies
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?