We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact beige metal box with two blue VGA inputs and one blue VGA output on the front

ATEN

ATEN VS92A 2 Port VGA Video Splitter KVM Switch

SKU CH-24C5-HCFFS MPN VS92A

Splits one VGA source to two monitors up to 65 metres with 1920 x 1440 resolution

  • PC connections2 x HDB-15 Female (Blue)
  • Console ports1 x HDB-15 Male (Blue)
  • Computer ports2 Ports
  • Monitor ports1 Port
  • Supported video resolution1920 × 1440
  • Monitor supportVGA, SVGA, XGA, UXGA Multisync
  • Duplicates one VGA source to two displays
  • Extends analog video signals up to 65 meters
  • Cascadable to three levels for eight total outputs
  • Delivers up to 350 MHz bandwidth for sharp images
  • Compact 5.12 x 2.95 x 1.77 inch metal enclosure

Signal Distribution

The ATEN VS92A is a two-port VGA video splitter that takes a single analog source and duplicates it to two displays. It serves classrooms, trade-show booths, digital-signage runs and monitoring stations where identical content must appear on multiple screens simultaneously. The unit requires no host software and draws power from an external 9 V DC adapter.

Resolution and Reach

The splitter supports resolutions up to 1920 x 1440 and a bandwidth of 350 MHz, covering VGA, SVGA, XGA, UXGA and multisync monitors. Signal boosting extends reliable transmission to 65 m (210 ft), far beyond the typical 25 ft limit of a standard graphics card and cable. Cascading three levels expands the system to eight outputs without degrading the picture.

Analog Interface Constraints

Because the device uses HDB-15 connectors, it carries only analog RGBHV signals; digital interfaces such as DVI, HDMI or DisplayPort are not supported. The 250 MHz bandwidth ceiling means higher refresh rates at the maximum resolution may not be sustained. Buyers needing digital output, audio embedding or more than eight displays must choose a different solution.

How it compares

Measured against everything we stock in KVM Switches & Rack Consoles, at today’s prices. Recalculated every night.

Price $31.99
Cheaper than about 85% of the 4,010 comparable items (median $105.49).

Specifications

Product
Brand nameATEN
Model nameVS92A
Product typeD-Sub
Splitter / switch typeVGA Monitor Splitter only
Display
Supported video resolution1920 × 1440
Graphics
Monitor supportVGA, SVGA, XGA, UXGA Multisync
Ports & slots
PC connections2 x HDB-15 Female (Blue)
Console ports1 x HDB-15 Male (Blue)
Computer ports2 Ports
Monitor ports1 Port
Power
Power requirementsDC9 V, 0.85 W (Max)
Size & build
Product dimensions5.12 in × 2.95 in × 1.77 in
Product weight0.71 lb (0.32 kg)
Shipping weight1.36 kg
Package size152 × 102 × 23 mm
Environment & compliance
Temperature range0ºC to 50ºC(32ºF to 122ºF)
Humidity range0% to 80%,Non-Condensing

Questions about this item

Will the VS92A work with my older VGA and SVGA monitors that only support lower resolutions?

The splitter supports VGA, SVGA, XGA, UXGA and multisync monitors, so your existing displays will work as long as they use standard HDB-15 connectors.

How can I confirm the VS92A is delivering the full 1920 x 1440 resolution to both screens after I connect everything?

Check each monitor's on-screen display or OS settings to verify the active resolution reads 1920 x 1440, and ensure the image is sharp across the full 65 metre cable run.

Does the VS92A package include the cables needed to connect two computers and one monitor, or must I buy them separately?

The unit provides two HDB-15 female ports for computers and one HDB-15 male port for the monitor; all three VGA cables must be purchased separately.

More in KVM Switches & Rack Consoles

Similar items