We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal rectangular 1U server power supply with dual 40mm fans, front grille and rear connector panel

Athena Power

Athena Power AP-1U60P868 600W 1U server power supply

SKU CH-5X3V-S1T6C

A 600 W single 1U server power supply with dual 40 mm fans, active PFC and 80Plus Platinum efficiency

  • Max wattage600 W
  • Power efficiency> 80%
  • Power supply redundancySingle
  • Main power connector20+4Pin
  • Output current+3.3 V@18A, +5 V@20A,12V1/V2@24/24A
  • Output type+3.3 V, +5 V,12V1/V2, -12 V, +5Vsb
  • 600 W output powers dense 1U servers
  • 250 000-hour MTBF at 25 °C ensures long service life
  • Dual 40 mm fans with auto speed control exhaust 100 % internal heat
  • Certified to IEC/UL/CSA/EN 62368-1 for US, Canada and Europe
  • Active PFC and remote on/off boost efficiency and reliability

Athena Power 600W 1U server PSU

The Athena Power AP-1U60P868 is a 600 watt single power supply built for the 1U rackmount form factor. It delivers +3.3V, +5V, dual +12V rails, -12V and +5Vsb outputs with a 20+4 pin main connector. Efficiency exceeds 80 percent and the unit meets UL/TUV 62368-1 safety compliance.

Suits 1U rack builds needing dual EPS and PCIe power

This supply fits administrators populating 1U server chassis that require both an 8 pin and an 8 (4+4) pin EPS connector plus two 6+2 pin PCIe connectors. It is not intended for redundant power configurations or for systems that need more than three SATA devices without additional adapters.

Standard 1U depth eases rack installation

At 200 millimetres long the unit slides into typical 1U rails without modification. Dual 40 millimetre ball-bearing fans at front and rear expel heat through the chassis. Installers should verify that the 9.0 amp draw at 110 volt input matches the rack PDU rating before powering on.

How it compares

Measured against everything we stock in Server & Hot-Plug PSUs, at today’s prices. Recalculated every night.

Price $200.99
Pricier than about 71% of the 3,798 comparable items (median $131.99).
Max wattage 600 W
Lower than about 54% of the 235 comparable items (median 668 W).

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameAthena Power
Model nameAP-1U60P868
Product type1U EPS
Ports & slots
Output type+3.3 V, +5 V,12V1/V2, -12 V, +5Vsb
Power
Max wattage600 W
Power efficiency> 80%
Power supply redundancySingle
Main power connector20+4Pin
Output current+3.3 V@18A, +5 V@20A,12V1/V2@24/24A
Supply voltage90–264 V
AC input frequency47–63 Hz
Rated input current9.0A@110 V, 4.5A@ 240 V
Power hold-up time11 ms Minimum at Nominal Input Voltage
Built-in protectionOCP, OVP,
Size & build
Product dimensions(L × W × H) 200 × 100 × 40.5 mm/ 7.87 × 3.94 × 1.59 in
Product weight4.5 lb (2.04 kg)
Environment & compliance
Humidity range20%-90%
Temperature rangeOperating: 0 °C to 55 °C on Full Load; Storage & Shipping: -40 °C to 70 °C
More details
Mean time between failures250,000 h on Maximum Load at +25 degree C

Questions about this item

Does the 20+4Pin main connector and EPS 12V 8Pin plus 8(4+4)Pin give me everything a dual-socket server motherboard needs?

Yes. The unit ships with one 24-pin ATX connector, one 8-pin EPS connector and one 8-pin (4+4) EPS connector, matching the standard dual-processor power layout.

Will the 90-264 V input range and 47-63 Hz frequency let me move the server between 110 V and 240 V sites without changes?

Yes. The power supply accepts 90 to 264 V at 47 to 63 Hz, so it operates on both common mains voltages without any switch or jumper.

How can I confirm the PSU is delivering stable power once installed?

Check that the system posts reliably, that voltages in BIOS or monitoring software stay within ATX tolerances, and that the dual 40 mm fans spin up and adjust speed under load.

More in Server & Hot-Plug PSUs

Similar items