Athena Power AP-P4ATX60FE 600W server power supply
- 600 W
- Single
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 700 W 2U server power supply with dual 60 mm fans, active PFC and connectors for dual Xeon CPUs plus two graphics cards
The Athena Power AP-2U70P868 is a single 700W unit built for 2U rackmount servers and industrial PCs that run continuous workloads. It fits IPC chassis where a compact EPS form factor is required and delivers the connectors needed for dual-processor boards. This supply is not for builders who need redundant hot-swap modules or a higher wattage ceiling for dense GPU clusters.
Efficiency exceeds 80% across loads, meeting the 80Plus Platinum benchmark, while the wide-range input accepts 90 to 264V at 47 to 63Hz without a voltage selector. Hold-up time is rated at 11ms minimum at nominal voltage, and protections include OCP and OVP on all rails. The unit is not suited for environments that demand 240V-only input or specialized DC-input server racks.
Two 60mm ball-bearing fans create a front-to-rear flow that exhausts system heat through the PSU, and a smart controller adjusts fan speed automatically. Standard ATX 20+4 pin, dual EPS 8-pin (one 8-pin and one 4+4-pin), two PCIe 6+2-pin, three SATA and two Molex connectors cover typical server builds. Installers must verify that the 200mm depth clears their chassis rails and that cable routing reaches the motherboard without strain.
Measured against everything we stock in Server & Hot-Plug PSUs, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Athena Power |
| Model name | AP-2U70P868 |
| Product type | 2U EPS |
| Ports & slots | |
| Output type | +3.3 V, +5 V,12V1/V2, -12 V, +5Vsb |
| Power | |
| Max wattage | 700 W |
| Power efficiency | > 80% |
| Power supply redundancy | Single |
| Main power connector | 20+4Pin |
| Output current | +3.3 V@18A, +5 V@20A,12V1/V2@28/28A |
| Supply voltage | 90–264 V |
| AC input frequency | 47–63 Hz |
| Rated input current | 9.0A@110 V, 4.5A@ 240 V |
| Power hold-up time | 11 ms Minimum at Nominal Input Voltage |
| Built-in protection | OCP, OVP, |
| Size & build | |
| Product dimensions | (L × W × H) 200 × 100 × 69.7 mm/ 7.87 × 3.93 × 2.74 in |
| Product weight | 5 lb (2.27 kg) |
| Environment & compliance | |
| Humidity range | 20%-90% |
| Temperature range | Operating: 0 °C to 55 °C on Full Load; Storage & Shipping: -40 °C to 70 °C |
| More details | |
| Mean time between failures | 250,000 h on Maximum Load at +25 degree C |
The AP-2U70P868 is a single 2U 700W unit with one 20+4Pin ATX, one EPS 8Pin and one EPS 8(4+4)Pin connector, so it supports dual processors without needing a redundant module.
The two 12V rails each supply up to 28A, giving combined 12V capacity for Xeon CPUs and two graphics cards on the 6+2Pin PCIe connectors.
Efficiency exceeds 80% at typical loads, so less input current is drawn from the 90-264V supply and waste heat inside the 2U chassis is reduced.
More in Server & Hot-Plug PSUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?