Athena Power AP-MPS3ATX80EP8 800W server power supply
- 800 W
- ATX 24 (20+4) Pin x…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 400W micro PS3 server supply with 80PLUS Bronze efficiency, Active PFC, 20+4 pin ATX and EPS-12V connectors, plus SATA, PCIe 6-pin and Molex outputs
Wattage 400W
The Athena Power Hercules Series AP-MPS3ATX40P8 delivers 400W of continuous power in a micro PS3 form factor. It is designed for replacement in Dell, HP, IBM, Compaq and Gateway systems or for new micro-ATX and mini-server builds. The unit carries 80PLUS Bronze certification and Active PFC for efficient operation across varied loads.
Verify that your chassis accepts the micro PS3 dimensions of 3.2 x 1.7 x 6 inches. Confirm the motherboard requires a 20+4 pin main connector, an EPS 8-pin and an additional EPS/P4 connector for CPU power. Ensure your drive configuration matches three SATA, two Molex and one floppy connector, while graphics needs fit two PCIe 6-pin plugs.
Active PFC and full-range input from 88 to 264 V maintain stable delivery during extended operation. The 80PLUS Bronze rating guarantees at least 82 percent efficiency at typical loads, reducing heat over long periods. A single fan with smart silent technology manages airflow, while a 17 ms hold-up time bridges brief mains interruptions without shutdown.
Measured against everything we stock in Server & Hot-Plug PSUs, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Athena Power |
| Product line | Hercules Series |
| Model name | AP-MPS3ATX40P8 |
| Power | |
| Max wattage | 400 W |
| Power supply redundancy | Single |
| Main power connector | 20+4Pin |
| Output current | +5 V@15A, +12V1@11A, +12V2@11A, +3.3 V@15A |
| Supply voltage | 88–264 V |
| AC input frequency | 47–63 Hz |
| Power hold-up time | 17 ms Minimum at Nominal Input Voltage |
| Size & build | |
| Product dimensions | 3.2 in × 1.7 in × 6 in |
| Product weight | 2 lb (0.91 kg) |
| Shipping weight | 1.27 kg |
| Package size | 222 × 165 × 102 mm |
| More details | |
| Fan configuration | 1 |
Other versions of this model
The power supply ships with a 20+4 pin ATX connector, an 8-pin EPS-12V connector, an additional EPS/P4 connector, two PCIe 6-pin connectors, three SATA connectors, two Molex connectors and one floppy connector. No extra cables are required for those interfaces.
This model is a single-unit design rated at 400W; it does not offer a redundant option. For a small server that needs only one supply, the single configuration is the correct choice.
The +12V rails are each rated at 11A, so the combined +12V capacity is the practical limit for modern components such as CPUs and graphics cards. The 400W figure is the total across all voltage rails.
More in Server & Hot-Plug PSUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?