Atp PU382ALB Drain Trap 3/8 In OD 50 Ft Light Blue
Light blue polyurethane drain tubing with 3/8 in outside diameter and 50 ft length for air or water lines
- Product typeDrain Components
- Product colorLight Blue
- Light Blue colour aids quick line identification
- Polyurethane construction resists abrasion and kinking
- 150 psi working pressure handles demanding air and water tasks
- 50 ft continuous length reduces joints and leak points
- Shore A 98 hardness keeps shape under vacuum up to 28 in Hg
Polyurethane Drain Tubing
This 50-foot length of light blue polyurethane tubing is manufactured for drain and trap installations. It handles both air and water media in automotive and general plumbing systems. The material carries a Shore A 98 hardness rating for durability.
Suitable for Standard Pressure Lines
Installers needing a 150 psi pressure rating and 140-degree Fahrenheit temperature limit will find this tubing fits the requirement. It is not for peristaltic pump setups and buyers needing jacketed hose should look elsewhere. The product carries California Proposition 65 warnings for cancer and reproductive harm.
3/8 Inch Outside Diameter
The 3/8 inch outside diameter paired with a 1/4 inch inside diameter determines fitting compatibility for each connection. This single dimension decides whether the tubing matches the ports on the equipment being serviced. Verify the port size before ordering.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $17.99
- Cheaper than about 68% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | ATP |
| Model name | PU382ALB |
| Product type | Drain Components |
| Product color | Light Blue |
Questions about this item
Will the 150 psi polyurethane tubing handle continuous daily pressure without overheating or softening?
The tubing is rated for 150 psi at up to 140 °F and Shore A 98 hardness, so it resists heat-related softening during all-day pressurised use.
What fittings or clamps are needed to connect the 3/8 in OD tubing to my existing air or water lines?
Use standard 3/8 in push-to-connect or barb fittings matched to the 1/4 in ID; no proprietary couplers are required.
Can the 50 ft coil be spliced into an older rubber hose system without leaks at the joint?
Yes, match the 3/8 in OD with compatible barbed splicers and clamps; the polyurethane material seals reliably against legacy rubber hose ends.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris
Legris 3699 12 13 Push-Fit Elbow Fitting 12 mm 1/4 in Brass
- Drain Components
$17.99
0.00021878BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017013BTC
In stock