We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Audio-Technica AT-VM520XEB dual moving magnet cartridge in navy and black with elliptical bonded stylus

Audio-Technica

Audio-Technica AT-VM520XEB cartridge 0.3 x 0.7 mil elliptical bonded stylus

SKU CH-Y87F-G1J0F MPN AT-VM520XEB

Dual moving magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus tracks grooves accurately for 20 to 20,000 Hz response

  • Accessory categoryCartridges & Needles
  • Spec summaryFrequency Response: 20 to 20,000 Hz Channel Separation: 24 d
  • Measurements0.39 in × 0.31 in × 0.2 in
  • Product colorBlack / Blue
  • HighlightsAT-VMx dual moving magnet cartridge with 0.3 × 0.7 mil ellip
  • Product weight0.25 oz
  • 3 x 0.7 mil elliptical bonded stylus tracks the record groove with accuracy for outstanding audio reproduction
  • Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response
  • PCUHD (Pure Copper Ultra High Drawability) coils with fewer coil turns deliver highly responsive.
  • Center shield plate between the left and right channels reduces crosstalk for clear stereo sound
  • Frequency response of 20 to 20,000 Hz with 24 dB channel separation at 1 kHz for balanced stereo performance

Dual Moving Magnet Cartridge

The Audio-Technica AT-VM520XEB is a dual moving magnet phono cartridge fitted with a 0.3 x 0.7 mil elliptical bonded stylus. It uses PCUHD copper coils and a paratoroidal winding structure to improve generating efficiency and transient response. A center shield plate separates the left and right channels to reduce crosstalk.

Vinyl Listeners Seeking Balanced Stereo

This cartridge suits listeners who want clear stereo imaging and a standard tracking force range of 1.8 to 2.2 g. The 47 k ohm load impedance matches typical phono stage inputs. Buyers needing a moving coil design or a nude stylus profile for lower tip mass should look at other designs.

0.3 x 0.7 mil Elliptical Bonded Stylus

The bonded elliptical stylus tip dimensions of 0.3 x 0.7 mil determine how the cartridge traces the record groove. This specific geometry provides the accuracy and compliance values listed in the specifications. Verify that this stylus profile matches the playback requirements of your turntable setup.

How it compares

Measured against everything we stock in Record Players & Phono Cartridges, at today’s prices. Recalculated every night.

Price $78.99
Cheaper than about 77% of the 456 comparable items (median $222.99).

Specifications

Product
Brand nameAudio-Technica
Model nameAT-VM520XEB
Product colorBlack / Blue
Accessory categoryCartridges & Needles
Size & build
Measurements0.39 in × 0.31 in × 0.2 in
Product weight0.25 oz
Shipping weight0.11 kg
Package size42 × 26 × 19 mm

Questions about this item

What headshell mounting pattern does the AT-VM520XEB use?

The cartridge body measures 0.39 by 0.31 by 0.20 inches and weighs 0.25 oz, so it fits a standard half-inch mount headshell with two screws on 0.5 inch centres.

How do I set the tracking force correctly on this cartridge?

Set the tonearm counterweight so the stylus presses down with 2.0 g; the acceptable range is 1.8 to 2.2 g, and the vertical tracking angle should sit at 20°.

When should I replace the 0.3 x 0.7 mil elliptical bonded stylus?

Replace the stylus when high-frequency detail fades or sibilance appears, typically after several hundred playing hours, because the bonded diamond tip wears faster than a nude design.

More in Record Players & Phono Cartridges

Similar items