AudioControl ACX-300.2 All Weather 2-Channel Car Amplifier
All-weather two-channel amplifier delivers 75 watts at 4 ohms, 150 watts at 2 ohms or 300 watts bridged, with IPX6 rating and Linkwitz-Riley crossover
- Amplifier channels2
- Product typeAmplifier
- IPX6 rated for water-jet protection in open-air installs
- 2 x 75 W RMS at 4 ohms for clean speaker power
- 300 W bridged at 4 ohms drives a subwoofer hard
- GTOTM Signal Sense turns amp on without remote wire
- 102 dBA signal-to-noise keeps background hiss inaudible
All-Weather 2-Channel Amplifier
The AudioControl ACX-300.2 is a two-channel car amplifier built for marine, UTV and motorcycle sound systems. It delivers 75 watts per channel at 4 ohms, 150 watts per channel at 2 ohms and 300 watts bridged at 4 ohms. An IPX6 rating protects the internals from heavy water exposure in open-air installations.
Installer-Friendly Wiring and Protection
Heavy-gauge quick-connect wiring allows fast, secure connections without special tools. The amplifier accepts both low-level preamp and high-level speaker inputs ranging from 500 mV to 12 Vrms. GTOTM Signal Sense automatically turns the unit on when an audio signal is detected, removing the need for a separate remote lead. A 30 A fuse rating is recommended for the power circuit.
Linkwitz-Riley Crossovers and Signal Quality
Built-in 12 dB/octave Linkwitz-Riley crossovers offer selectable 80 Hz and 120 Hz points plus a bypass option for full-range operation. Frequency response spans 26 Hz to 22 kHz with a signal-to-noise ratio of 102 dBA referenced to 50 W at 4 ohms. Total harmonic distortion plus noise remains below 0.05 percent for clean output.
How it compares
Measured against everything we stock in Car Audio Amplifiers, at today’s prices. Recalculated every night.
- Price $369.99
- Pricier than about 70% of the 158 comparable items (median $225.49).
Specifications
| Product | |
|---|---|
| Product type | Amplifier |
| Audio & video | |
| Amplifier channels | 2 |
Questions about this item
What input voltage does the ACX-300.2 accept in high-level mode?
High-level inputs accept 1 Vrms to 12 Vrms, letting you tap factory speaker outputs directly without a line-output converter.
What mounting clearance does the IPX6 chassis require?
The all-weather case is sealed to IPX6; leave enough space for the heavy-gauge quick-connect plugs and the 30 A fuse holder on the power lead.
How do I enable signal-sense turn-on on the ACX-300.2?
GTO Signal Sense activates automatically when it detects music on the speaker-level inputs — do not run a separate remote wire or the amp will stay on.
More in Car Audio Amplifiers
Similar items
Kenwood XR601-1 Excelon 600-Watt Mono Car Amplifier
- Class D
- 4 Channels
Kenwood X803-5 1600W 5-Channel Car Amplifier
- Amplifier
- Delivers up to 1600…
Wet Sounds Front Battery 4 Amplifier Power Kit car amplifier
- Amplifiers





